Official Release Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability
Hello Everybody,
A new firmware has been released for the Archer BE550 recently with a few fixes you will likely be interested in, including fixes for a few of the behaviors reported on the forums.
This Article applied to:
Archer BE550 V1/V1.6
Modifications and Improvement
This firmware introduces the wireless firmware update, enhances system stability, and optimizes MLO network stability.
1. Updated wireless firmware to fix related instability issues.
2. Fixed the MLO disconnection issue with the Samsung S24U and other similar WiFi 7 clients.
3. Updated default encryption to WPA2/WPA3 for main 2.4G and 5G Wi-Fi networks.
4. Fixed the bug allowing clients on Guest Wi-Fi to access USB sharing in AP mode.
5. Enhanced VPN stability.
6. Fixed the issue where tether clients show no clients in special cases.
7. Improved app performance with server request optimizations.
8. Fixed the issue where DDNS stops working in special cases.
Check for an Update to Your Routers Firmware, Or Download and Apply the Firmware Manually from Your Device's Download Page
Firmware Download:
Before the Upgrade
(1) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
Direct Firmware Download Link
You can also download the firmware from the below link directly and update manually:
Archer BE550_V1/V1.6_1.0.11 Build 20240807
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Model, hardware version, and firmware version of your router.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi
Thanks for your response.
This is a update screenshot of Connectivity labs from S24u connected to a different brand of wifi 7 router MLO.
It does shows MLO connected time of more than an hour but once I switch back to MLO of BE550. The time stops updating.
Also.. pls advise where can I find the MLO status in BE550?
Thanks
- Copy Link
- Report Inappropriate Content
Hi
I ran Wifiman app on my S24u connected to BE550 MLO and a different brand wifi 7 router.
It shows connected only to 6Ghz to BE550
It shows MLO connection with 2.4/5Ghz with different brand wifi7 router
Thanks
- Copy Link
- Report Inappropriate Content
PandaJas wrote
@PandaJas You may login to the router's web interface and navigate to Network Map > Clients. There, you should be able to see the real-time rate for the S24U. Please check if it indicates whether the phone is connected to 5G, 6G, or MLO.
BTW, can I know the brand and model number of the other Wi-Fi 7 router that you're using to test this MLO? Thank you very much.
- Copy Link
- Report Inappropriate Content
Hi
Here is the screen shot
S24U is connected to MLO SSID but the Wifi Signal Icon shows otherwise.
The other Wifi Router brand/model is (Xiaomi BE3600 2.5G)
Thanks
- Copy Link
- Report Inappropriate Content
Thank you very much for the update.
To assist and figure it out efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
I have the same problem. BE550 1.0.11 firmware, Samsung S24 Ultra connecting to MLO SSID, but only to one band. The switching between 6Ghz/5Ghz OK, but the multi-band connection not working.
- Copy Link
- Report Inappropriate Content
OK, I also tested it with a Xiaomi 13T Pro, the result is the same. So it's the router's problem, not the phone's.
- Copy Link
- Report Inappropriate Content
I'd like to clarify the connection status of the Samsung S24 Ultra based on insights from our development and engineering teams.
Currently, the S24U only supports 2+5 or 2+6 Multi-Link Multi-Radio (MLMR). It does not support 5+6 MLMR due to hardware limitations. While it may support 5+6 Multi-Link Single Radio (MLSR) in the future, this feature is not enabled at the moment. This means that when using the Xiaomi BE3600 or our BE230/BE3600 routers, both supporting 2+5 MLO, the connection will work with 2+5 MLMR, which should be reflected in your Connectivity Labs as a Multi-Link connection.
However, the BE550, which uses 5+6 MLO, will not work in a multi-link configuration with the S24U.
For more technical details about MLO, you can refer to this article: Supercharging Wi-Fi 7: Low Latency and Multi-Link Operation.
From the above analysis, it seems the situation may be similar for your Xiaomi 13T Pro, but I cannot confirm this at the moment without confirmation from Xiaomi support. I recommend checking with Xiaomi support to see if the Xiaomi 13T Pro supports 2+5 or 2+6 Multi-Link Multi-Radio (MLMR).
- Copy Link
- Report Inappropriate Content
Could the support for 2+5 or 2+6 Multi-Link Multi-Radio (MLMR) be enable in the BE550 since it is a tri-band ap router.
I have written to the engineering support for this but yet to get an response.
- Copy Link
- Report Inappropriate Content
Thank you for explaining it, it makes sense now. I didn't know about this hardware limitation for phones. The Intel BE200 adapter in my ASUS notebook works, uses both MLO lanes. Obviously it's not a big problem as long as the 5Ghz-6Ghz switching works (the S24 Ultra switches to 5Ghz when the 6Ghz band is out of range and then back), since the network speed is still adequate, but I thought that the the error is in the router. Is there a chance that 3-band MLO will work in this router, or is this a hardware limitation from the router's point of view?
This is the screenshot of my notebook's connection status and speed on Windows 11 24H2 Release Preview. The maximum speed that the BE200 can achieve on the single 6Ghz band is 5188 Mbps, so multi link must be working here as it should. (Sorry, this screenshot is in Hungarian, but I think it's understandable)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 5031
Replies: 32