TP link wifi range extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP link wifi range extender

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP link wifi range extender
TP link wifi range extender
2024-03-27 08:22:54 - last edited 2024-03-28 07:16:59
Model: RE190  
Hardware Version:
Firmware Version:

Hi, I have a wifi range extender in my home, its a RE190 model (does not show in de model list so filled in 200).

It suddenly does not give any signal any more and just restarts every few seconds

  0      
  0      
#1
Options
1 Accepted Solution
Re:TP link wifi range extender-Solution
2024-03-27 09:04:50 - last edited 2024-03-28 07:16:59

  @GPBH 

 

What you can try is a hardware reset by pressing its reset button for about 10 seconds.

If the RE190 works after a successful reset you have to re-configure it from scratch.

If it still behaves the same then follow the advise from my previous post.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:TP link wifi range extender
2024-03-27 08:55:57

  @GPBH 

 

It depends how old is your device - if it's under warranty contact your retailer, otherwise contact your local support for assistance.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:TP link wifi range extender
2024-03-27 08:57:17

  @terziyski 

 

Well I think I bought it about half a year ago

 

  0  
  0  
#3
Options
Re:TP link wifi range extender-Solution
2024-03-27 09:04:50 - last edited 2024-03-28 07:16:59

  @GPBH 

 

What you can try is a hardware reset by pressing its reset button for about 10 seconds.

If the RE190 works after a successful reset you have to re-configure it from scratch.

If it still behaves the same then follow the advise from my previous post.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  0  
  0  
#4
Options