GiffGaff 4G LTE setup for TpLink MR200
There's a number of threads on this forum and elsewhere outlining what may help to stabilise the LTE 4G connection on a MR200, I thought it may help someone else if I posted this suggestion.
It seems that if the DEFAULT internet settings are left at AUTO, then in some areas / signal fluctuations / situations the router may repeatedly fall back to 3G or otherwise drop its LTE connection and refuse to reconnect unless restarted.
The solution is to set 4G ONLY in ADVANCED>NETWORK>INTERNET
Search for and choose the appropriate carrier and band.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
JohnArcherMR400 wrote
I have the same issue (not achieving stability of 4G with GifGaf (O2) sim). Similar solution however but I set it at 3G. Stability of connection has returned. Surprisingly the through put is better than the theoretical limit of 3G I am getting download of 10.5 mbps and upload of 4 mbps Not brilliant but at least the Internet connection stays up. Good enough for YouTube streaming. According to what I have read, it would appear that we have a 3.5G (yes it is a real protocol) connection. Its 3G with wings :) I am also aware that engineers have been working on my local mast. I will try the other suggestion of Google's DNS 8.8.8.8 + 8.8.4.4
Of course the 3G setting seems also to give good stability - in fact I am using that in one location to provide a reliable uplink for a SumUp Card reader that requires very little data to function anyway.
You will need to keep an eye on exactly when O2 plan to switch off their 3G network::
Vodafone is planning to complete its switch-off in early 2024.
EE plans to switch-off in early 2024, starting January.
Three expects to switch-off by the end of 2024.
O2 is planning to switch-off in 2025.
- Copy Link
- Report Inappropriate Content
Appreciate your comment.
hopefully we will be upgraded to 5G and new kit may bypass the issue.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1039
Replies: 5
Voters 0
No one has voted for it yet.