Home Network Community > DSL Modem Routers > Cant connect through Remote Management
< DSL Modem Routers

Cant connect through Remote Management

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cant connect through Remote Management

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cant connect through Remote Management
Cant connect through Remote Management
2023-08-30 17:47:02 - last edited 2023-08-31 07:49:33
Tags: #Remote Management
Model: Archer VR600v  
Hardware Version: V3
Firmware Version: 1.5.0 0.9.1 v009e.0 Build 220518 Rel.43816n

Router is brand new, Can't connect through Remote Management

I did exactly what it said in this link: Link

Copy paste the "Manage This Router via the Address:" to the url and nothing.
I try with the ip and with the ddns, with default port 80 and with the https - same result.
As a matter of fact i cant even ping my public ip address.
Do i need to connfigure some port forwaring for this to work?

Thank you

P.S
Through the Tether app from my android from outside local network its working.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Cant connect through Remote Management-Solution
2023-08-30 20:12:07 - last edited 2023-08-31 07:49:33

  @Andrea_22 

 

You're behind a CG-NAT - that's the reason you can't reach your modem from outside your network (check the fourth IP range in my previous post).

Your only option is to contact your ISP and ask if it's possible to receive your public IP address on the modem WAN port.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
5 Reply
Re:Cant connect through Remote Management
2023-08-30 19:32:59

  @Andrea_22 

 

According to your WebGUI you should try to access the modem at port 8080 via http.

Also your modem WAN IP address has to be with a public IP address, i.e. not within the following IP address ranges:

  • Range from 10.0.0.0 to 10.255.255.255 — a 10.0.0.0 network with a 255.0.0.0 or /8 (an 8-bit) mask
  • Range from 172.16.0.0 to 172.31.255.255 — a 172.16.0.0 network with a 255.240.0.0 or /12
  • A 192.168.0.0 to 192.168.255.255 range, which is a 192.168.0.0 network masked by 255.255.0.0 or /16
  • A special range 100.64.0.0 to 100.127.255.255 with a 255.192.0.0 or /10 network mask; this subnet is recommended according to rfc6598 for use as an address pool for CGN (Carrier-Grade NAT)
If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Cant connect through Remote Management
2023-08-30 19:51:04

  @Andrea_22 

Thank you for fast replay

I did exactly that, you can try for your self 
when i google whatismyip i get: 147.234.69.180  try that as well as http://147.234.69.180:8080/ and smae result.




A photo of tha status section in my router to show the ip address i get: 

  0  
  0  
#3
Options
Re:Cant connect through Remote Management-Solution
2023-08-30 20:12:07 - last edited 2023-08-31 07:49:33

  @Andrea_22 

 

You're behind a CG-NAT - that's the reason you can't reach your modem from outside your network (check the fourth IP range in my previous post).

Your only option is to contact your ISP and ask if it's possible to receive your public IP address on the modem WAN port.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
Re:Cant connect through Remote Management
2023-08-30 20:41:45

  @Andrea_22 
thank you

and also i wasnt able to connect through open vpn server, i guess its  because i behind a CG-NAT as well?

  0  
  0  
#5
Options
Re:Cant connect through Remote Management
2023-08-31 00:13:23

  @Andrea_22 

 

That's correct.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 778

Replies: 5

Tags

Remote Management
Related Articles
Remote management
590 0
 Cant connect to web management
509 0
Accessing Remote Management
568 0
Cant connect
473 0
cant connect
154 0
Cant connect
189 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.