VPN Server Setup
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello, I have tried to setup the VPN server via open vpn and also pptp, but nothing works can somebody help me set it up
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Yes, that's possible - to check that compare your AX10 WAN IP address and your public IP address.
If they are different then that's the case and you're probably behind double NAT or CG-NAT.
You can check this story as well.
- Copy Link
- Report Inappropriate Content
Here's a video guide and two case scenario for setting up an Open VPN on a TP-Link router.
- Copy Link
- Report Inappropriate Content
@DjDocGaming I have already tried that method and also tried the DNS method with Tp-Link & No-IP
Nothing is helping
Is there any way my ISP is blocking it?
- Copy Link
- Report Inappropriate Content
Yes, that's possible - to check that compare your AX10 WAN IP address and your public IP address.
If they are different then that's the case and you're probably behind double NAT or CG-NAT.
You can check this story as well.
- Copy Link
- Report Inappropriate Content
Ok i saw my Public IP is different than WAN IP. So i should get static IP, all will be solved?
- Copy Link
- Report Inappropriate Content
Contact your ISP and ask them if it's possible to receive your public IP address on your AX10 WAN port.
Whether static or dynamic it will do the job. In case of dynamic public IP address you could use the DDNS feature (TP-LInk or no-ip).
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 775
Replies: 5
Voters 0
No one has voted for it yet.