Home Network Community > 5G/4G Wi-Fi Routers/MiFi > MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
< 5G/4G Wi-Fi Routers/MiFi

MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade

12

MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade

MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-06-24 18:44:19
Tags: #Firmware Update #Carrier Aggregation #slow network
Model: Archer MR600  
Hardware Version: V3
Firmware Version: 230506

Hi,
I was upgraded the firmware version of mr600 V3 (EU) from version 220727 to 230506 (Archer_MR600v3_1.1.0_0.9.1_[230506-rel77096]_up_boot_Release_Beta_2023-05-06_21.34.31.bin).
Since then internet connection is not working with wifi, few links are opening few or not, very slow net speed, connects for some devices not to some.
Getting "connected without internet" in my mobile (I am using AIRTEL sim for router).

When I tried to downgrade the firmware version from 230506 to Archer_MR600(EU)_V3_220307 I am getting error code 71211. I have added both the screenshot for this error.

 

I request you to please send me the link to download the firmware version  Archer_MR600(EU)_V3_220727 and downgrade the firmware.
suggest me if any other solution for this issue.

 

 

 

  0      
 
  0      
 
#1
Options
19 Reply
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-06-26 08:09:12

  @Jagadeeshaiah 

 

Upon checking, the firmware 230506 (Archer_MR600v3_1.1.0_0.9.1_[230506-rel77096]_up_boot_Release_Beta_2023-05-06_21.34.31.bin) is a beta firmware for Jio 5G SIM card only, and other ISP SIM cards might not work properly even after downgrading the firmware.

 

May I know if you have Jio 5G SIM card? If so, it is recommanded to insert your Jio 5G SIM card into the MR600 to see if internet works fine on all client devices.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-06-26 19:07:57

  @Jagadeeshaiah i have upgraded the firmware to beta version. But now unable to use airtel internet. Please help me to downgrade the firmware, as i have only airtel network in our area. Please help.

  1  
  1  
#3
Options
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-07-31 15:44:03

  @Sunshine 

 

same problem 

please help me

 

whatsup no-8858133841

  0  
  0  
#4
Options
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-07-31 16:36:07

  @Sunshine 

  0  
  0  
#5
Options
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-08-02 07:01:50

  @SS-PHOTO 

 

You mean you updated the MR600 V3 beta firmware for Jio SIM issue as well? may I know if you have any Jio SIM card? 

If not, who is your ISP please?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  2  
  2  
#6
Options
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-08-02 17:10:01

  @Sunshine मेरे पास सर जिओ पोस्ट पेड की ही सिम है जो की मैंने अपने राऊटर में लगाया है | मैंने अभी अगले महीने ही Archer MR-600 V3 लिया है  बहुत अच्छा चल रहा था | लेकिन 28/07/2023 को अपडेट किया जो की बीटा वर्शन में अपडेट हो गया है तभी से सारी समस्या आ रही है |  अगर आपके पास कोई जानकारी हो तो कृपया आप व्हाट्सअप पर जानकारी दीजिये आपकी बहुत कृपा होगी | No-8858133841

  0  
  0  
#7
Options
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-09-25 05:40:42

@Jagadeeshaiah 

 

Hi,

 

I need to downgrade my tp link router Archer v3 to original firmware. Latest beta firmware is giving me very slow internet speed and internet connectivity drop every 10  minutes. I need to downgrade please help me by providing the link. Please contact me at

email : bharathyadavkpb@gmail.com

phone no : 6363017734/8050150760firmware downgrade   

  0  
  0  
#8
Options
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-09-25 09:04:01

  @Bharath_Yadav 

 

Hi, you could download the previous official firmware from TP-Link official website:

Firmware Download for Archer MR600 V3

 

May I know who the ISP is? Jio or not?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#9
Options
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2023-09-25 09:30:37

  @Sunshine 

 

My ISP is Jio.

 

I am unable to downgrade the firmware that u sent me the link. I restored to factory reset and then i tried to upgrade the firmware but i am getting error message as

**** Error Code 71211. Failed to upload the upgraded file.Please upload the correct file. Below is the screenshot for the same.firmware upload error

 

 

  0  
  0  
#10
Options
Re:MR600 V3(EU) is not working with WIFI and partially with LAN connection after firmware upgrade
2024-01-02 01:01:55

@Sunshine 

 

I'm also using mr600 v3 I'm unable to downgrade the firmware version.

 

Please share the correct version of firmware

 

Currently I'm using 220811 firmware version.

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 2659

Replies: 19

Tags

Firmware Update Carrier Aggregation
slow network
Related Articles
 MR600 V3(EU) is not working with WIFI and partially with LAN connection
524 0
MR600 4G+ is not working
2391 7
MR600 v3 4g/4g+ issue
1228 0
MR600 v3 - Switzerland - 4G+ on and off
10635 5
MR600 carrier aggregation not working
1552 0
Mr600 v3
1412 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.