Solution India Jio SIM stops working on TP-Link LTE Gateway Routers after upgrading to 5G
This Article Applies to:
All TP-Link LTE Gateway Routers including Archer MR600, TL-MR6400, etc.
Issue Description/Background:
Some customers reported that their Jio SIM card was working fine before, but the internet stops working after upgrading to 5G, old 4G Jio SIM card still works fine on the same device, while the 5G enabled Jio SIM card works on a smartphone or Jio's own router.
Available Solution
Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20 and x.30 versions. Please note that the x.0, x.20 and x.30 are different versions and unable to use the same firmware.
For Archer MR600(EU) V3: Archer_MR600(EU)_V3_230811
For Archer MR600(EU) V2: Archer_MR600(EU)_V2_230801
For TL-MR6400(EU) V5.30: TL-MR6400(EU)_V5.30_230801
For TL-MR6400(EU) V5.20: TL-MR6400(EU)_V5.20_230815
For Archer MR200(EU) V5.30: Archer_MR200(EU)_V5.30_230816
For Archer MR200(EU) V5.20: Archer_MR200(EU)_V5.20_230815
For Archer MR400(EU) V4.30: Archer_MR400(EU)_V4.30_230928
For Archer MR600(EU) V1: Archer_MR600(EU)_V1_Builld_20231127
For Archer MR200(EU) V5: Archer_MR200(EU)_V5_24040425
For Archer MR200(EU) V6: Archer_MR200(EU)_V6_24040425
For TL-MR6400(EU) V5: TL-MR6400(EU)_V5_20240425
For TL-MR100(EU) V2: TL-MR100(EU)_V2_240313
Notes:
1) If there is still no internet or no IPv4 address when using the above beta firmware with Jio 5G SIM card, please check the default APN profile settings on Advanced->Network->Internet page, if the PDP Type is not on "XLAT", please create a new profile manually and set PDP Type as "XLAT", leave other parameters the same as default profile, then check if the problem will be resolved.
If so, please share with us the MCC&MNC of your SIM card, so that we could update the default profile settings for your SIM card.
You could insert the Jio 5G SIM card into your smartphone, then check the APN profile settings on the phone to find the MCC and MNC, please share with us the screenshot, thanks a lot!
2) The beta firmware is for Jio 5G SIM card only, please don't update it if you would like to use a different SIM card.
3) We will update this thread once there is any other beta firmware for other models or versions.
4) Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
If internet still doesn't work with 5G Jio SIM after updating the above firmware, please make sure the PDP Type in the APN profile is XLAT, and provide the following information for further follow-up:
1. A screenshot of the Advanced > Status page.
2. A screenshot of the Advanced > Network > Internet page.
3. Save and send us the system log file. You can go to Advanced > System Tools > System Log page to save the log file.
4. Model number, hardware and firmware version of the TP-Link router.
Do let the community know if there is anything else that we can help with. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Please provide beta version for MR200.ver -6.
5.30 AND 5.20 Version didn't support in this router.
- Copy Link
- Report Inappropriate Content
in this beta firmware there is a huge problem with carrier aggregation!
the CA keeps dropping and 4g+ keeps disconnecting like crazily and sometime suddenly the ping goes from 20ms to 250ms,
please fix this issue!
- Copy Link
- Report Inappropriate Content
I have found another solution for this problem You guys if can buy new Jio Sim and do not use that sim in any 5G phone. Just do activate it in any 4 phone and directly use it any TP link sim router. Internet works if you do this.
- Copy Link
- Report Inappropriate Content
@arunvijay @TheOneUser @PREMANANDA @senpoos1 @VipinPlus
Hi All,
Glad to inform you that the beta firmware for MR600 V1 for Jio 5G SIM issue is avaialble now, please find it on the original post of this thread and let us know if it solves the problem.
Also remember to monitor if the Jio 5G SIM is plug and play, or you need to create the XLAT profile manually, If you need to create XLAT profile manually, please let us know the MCC and MNC of your SIM card.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello @Sunshine Is there any update for MR6400 V1 . Any Beta version available for this ? Jio 5G sim is not working still. kindly give us update on this.
- Copy Link
- Report Inappropriate Content
Hi, I am afraid there will be no beta firmware for MR6400 V1 for this issue, as it is a quite old product and has been discontinued for many years.
- Copy Link
- Report Inappropriate Content
any idea when we will get update in MR 100 for jio SIM issue?
- Copy Link
- Report Inappropriate Content
@Солнечный свет Добрый день, вижу что прошивка для mr600 v1 выпущена на базе старой прошивки, старее даже той которая есть на сайте, по факту исправляя одну проблему устройство откативаешь в прошлое, планируеться ли випуск на базе новой прошивки или хотя бы на базе прошивки которая на сайте?
Также ранее была выпущена бета прошивка версии 1.2.0_0.9.1 22.08.18 и обещали в скором времени выпуск финальной версии и уже более года спустя, так и не видно финальной версии. Возможно есть более свежие наработки на базе этой бета версии и сможете поделиться?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 42
Views: 81441
Replies: 423