Solution India Jio SIM stops working on TP-Link LTE Gateway Routers after upgrading to 5G
This Article Applies to:
All TP-Link LTE Gateway Routers including Archer MR600, TL-MR6400, etc.
Issue Description/Background:
Some customers reported that their Jio SIM card was working fine before, but the internet stops working after upgrading to 5G, old 4G Jio SIM card still works fine on the same device, while the 5G enabled Jio SIM card works on a smartphone or Jio's own router.
Available Solution
Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20 and x.30 versions. Please note that the x.0, x.20 and x.30 are different versions and unable to use the same firmware.
For Archer MR600(EU) V3: Archer_MR600(EU)_V3_230811
For Archer MR600(EU) V2: Archer_MR600(EU)_V2_230801
For TL-MR6400(EU) V5.30: TL-MR6400(EU)_V5.30_230801
For TL-MR6400(EU) V5.20: TL-MR6400(EU)_V5.20_230815
For Archer MR200(EU) V5.30: Archer_MR200(EU)_V5.30_230816
For Archer MR200(EU) V5.20: Archer_MR200(EU)_V5.20_230815
For Archer MR400(EU) V4.30: Archer_MR400(EU)_V4.30_230928
For Archer MR600(EU) V1: Archer_MR600(EU)_V1_Builld_20231127
For Archer MR200(EU) V5: Archer_MR200(EU)_V5_24040425
For Archer MR200(EU) V6: Archer_MR200(EU)_V6_24040425
For TL-MR6400(EU) V5: TL-MR6400(EU)_V5_20240425
For TL-MR100(EU) V2: TL-MR100(EU)_V2_240313
Notes:
1) If there is still no internet or no IPv4 address when using the above beta firmware with Jio 5G SIM card, please check the default APN profile settings on Advanced->Network->Internet page, if the PDP Type is not on "XLAT", please create a new profile manually and set PDP Type as "XLAT", leave other parameters the same as default profile, then check if the problem will be resolved.
If so, please share with us the MCC&MNC of your SIM card, so that we could update the default profile settings for your SIM card.
You could insert the Jio 5G SIM card into your smartphone, then check the APN profile settings on the phone to find the MCC and MNC, please share with us the screenshot, thanks a lot!
2) The beta firmware is for Jio 5G SIM card only, please don't update it if you would like to use a different SIM card.
3) We will update this thread once there is any other beta firmware for other models or versions.
4) Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
If internet still doesn't work with 5G Jio SIM after updating the above firmware, please make sure the PDP Type in the APN profile is XLAT, and provide the following information for further follow-up:
1. A screenshot of the Advanced > Status page.
2. A screenshot of the Advanced > Network > Internet page.
3. Save and send us the system log file. You can go to Advanced > System Tools > System Log page to save the log file.
4. Model number, hardware and firmware version of the TP-Link router.
Do let the community know if there is anything else that we can help with. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine need firmware for Archer MR500 VR5.0
- Copy Link
- Report Inappropriate Content
I'm using a TL-MR 100 and jio 5g sim is not working in that.Could you send me the beta version or a firmware update for my device.
- Copy Link
- Report Inappropriate Content
Please let me know whether users are able to read SMS on Jio 5G working models ?
- Copy Link
- Report Inappropriate Content
Hi, there is no beta firmware for MR400 yet, and beta firmware will be provided for newer version MR400 V4.20 and V4.30, please pay attention to the solution update of this thread.
In addition, for Jio SMS issue, I am afraid it will still not work since it requires VoLTE enabled, refer to this thread: Can’t send and receive SMS on TP-Link 4G Routers with Jio SIM card
If other Jio users are using 5G Jio SIM at this moment with TP-Link working routers, please share with us your testing results.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Regarding the MR100, please refer to this reply: https://community.tp-link.com/en/home/forum/topic/604130?replyId=1241170
- Copy Link
- Report Inappropriate Content
@Sunshine when we can expect the beta version of MR400 V4.30 ?
- Copy Link
- Report Inappropriate Content
I'm using MR200.
There is no luck even updating the isp and firmware. However we get rid of Ambani's bumper offer.
Wait until your recharge is expired.
Keep your sim in 4g phone only. And recharge the sim and ensure that no unlimited 5g is given to you.
By doing this my router is working fine.
Don't try to keep the sim in any 5g devices
- Copy Link
- Report Inappropriate Content
Here i cant find any solution for MR 100@Sunshine
- Copy Link
- Report Inappropriate Content
Information
Helpful: 42
Views: 81456
Replies: 423