Adress reservation not working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I have a problem with the adress reservation on my deco. I followed the procedure on this page : https://www.tp-link.com/us/support/faq/1795/
However, each time an equipment is shutdown and up again, the IP adress changes. For example: I set my computer to 192.168.1.X, and then on the next reboot, it will give the adress 192.16.1.Y...
and by the way, the adress reservation system, after a certain time, shows 192.168.2.X (and no longer 192.168.1.X)... I tried to change it back several times but it keeps coming back...
are the two subjects linked in some way?
what to do to solve this?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
Can I also have a picture of your LAN IP settings under Deco APP>More>Advanced>LAN IP?
And will you be able to reproduce the same issue on a different device?
I think your case is a little similar to this one:
https://community.tp-link.com/en/home/forum/topic/567404?replyId=1110242
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
Can I also have a picture of your LAN IP settings under Deco APP>More>Advanced>LAN IP?
And will you be able to reproduce the same issue on a different device?
I think your case is a little similar to this one:
https://community.tp-link.com/en/home/forum/topic/567404?replyId=1110242
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
Thanks you.
Yes it is exactly the same thing. I changed the whole thing to 192.168.5.X and now it is working...
Not very user friendly though, I had to change all my IP settings on my network...
I confirm that it wasn't working for any device.
Best regards
- Copy Link
- Report Inappropriate Content
Hi, Thank you for the feedback.
It will be fixed along with a firmware upgrade.
Another suggestion would be to change the subnet mask to 255.255.255.0 instead of 255.255.252.0.
By the way, I am a little curious when the LAN IP is changed to 192.168.5.x/255.255.252.0, what are the IP addresses that you have got from Deco, 192.168.4.1-254, or 192.168.5.1-192.168.7.254?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
Yes, I already changed the subnet mask to 255.255.255.0 before hand, so I only got adresses like 192.168.5.X
Best regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 742
Replies: 4
Voters 1