Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Adress reservation not working

< Deco

Adress reservation not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Adress reservation not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Rainmaker92

2023-03-13 11:27:49 - last edited 2023-03-15 07:47:29

Posts: 6

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2023-03-10

Adress reservation not working

2023-03-13 11:27:49 - last edited 2023-03-15 07:47:29

Model: Deco X80-5G

Hardware Version:

Firmware Version: 2.1.0 Build 20230224 Rel.60496

Hello,

I have a problem with the adress reservation on my deco. I followed the procedure on this page : https://www.tp-link.com/us/support/faq/1795/

However, each time an equipment is shutdown and up again, the IP adress changes. For example: I set my computer to 192.168.1.X, and then on the next reboot, it will give the adress 192.16.1.Y...

and by the way, the adress reservation system, after a certain time, shows 192.168.2.X (and no longer 192.168.1.X)... I tried to change it back several times but it keeps coming back...

are the two subjects linked in some way?

what to do to solve this?

1 Accepted Solution

David-TP

2023-03-15 07:11:39 - last edited 2023-03-15 07:47:29

Posts: 12780

Helpful: 1790

Solutions: 1294

Stories: 9

Registered: 2020-04-14

Re:Adress reservation not working-Solution

2023-03-15 07:11:39 - last edited 2023-03-15 07:47:29

@Rainmaker92

Hi, Thank you very much for the feedback.

Can I also have a picture of your LAN IP settings under Deco APP>More>Advanced>LAN IP?

And will you be able to reproduce the same issue on a different device?

I think your case is a little similar to this one:

https://community.tp-link.com/en/home/forum/topic/567404?replyId=1110242

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Recommended Solution

Rainmaker92

LV1

2023-03-15 07:51:28

Posts: 6

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2023-03-10

Re:Adress reservation not working

2023-03-15 07:51:28

@David-TP

Thanks you.

Yes it is exactly the same thing. I changed the whole thing to 192.168.5.X and now it is working...

Not very user friendly though, I had to change all my IP settings on my network...

I confirm that it wasn't working for any device.

Best regards

David-TP

2023-03-15 09:47:32

Posts: 12780

Helpful: 1790

Solutions: 1294

Stories: 9

Registered: 2020-04-14

Re:Adress reservation not working

2023-03-15 09:47:32

@Rainmaker92

Hi, Thank you for the feedback.

It will be fixed along with a firmware upgrade.

Another suggestion would be to change the subnet mask to 255.255.255.0 instead of 255.255.252.0.

By the way, I am a little curious when the LAN IP is changed to 192.168.5.x/255.255.252.0, what are the IP addresses that you have got from Deco, 192.168.4.1-254, or 192.168.5.1-192.168.7.254?

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Rainmaker92

LV1

2023-03-16 09:05:26

Posts: 6

Helpful: 4

Solutions: 0

Stories: 0

Registered: 2023-03-10

Re:Adress reservation not working

2023-03-16 09:05:26

@David-TP

Yes, I already changed the subnet mask to 255.255.255.0 before hand, so I only got adresses like 192.168.5.X

Best regards

Adress reservation not working

Adress reservation not working

Information

Voters 1

Tags