Archer MR600 V1

Archer MR600 V1

57 Reply
Re:Archer MR600 V1
2022-10-22 13:43:13

The first beta firmware posted by kevin works fine with 4g+ or carrier agre..... hope devs can fix it before the official firmware is released thanks.

  1  
  1  
#22
Options
Re:Archer MR600 V1
2022-11-01 09:56:04

I can confirm this problem; neither LTE+ nor band aggregation with the new beta firmware.

In my area the signal is very strong and there are bands 1, 3, 20 available.

There is also another (very, very, very) strange thing: with the new beta firmware, my internet connection is way faster than before!

That is a real mystery!

 

 

  1  
  1  
#23
Options
Re:Archer MR600 V1
2022-11-01 12:25:07

  @ralphm24 

 

Hi Ralphm24

Herewith two screen shots on the beta software showing4G+ aggregation on both the basic and advanced screen. Please note in advanced screen the signal strength. I have also done a speed test showing 103mbps. The best achieved has been 130Mbps download. 

 

  0  
  0  
#24
Options
Re:Archer MR600 V1
2022-11-01 17:05:38 - last edited 2022-11-01 17:06:19

Twincab wrote

  @ralphm24 

 

Hi Ralphm24

Herewith two screen shots on the beta software showing4G+ aggregation on both the basic and advanced screen. Please note in advanced screen the signal strength. I have also done a speed test showing 103mbps. The best achieved has been 130Mbps download. 

 

The old beta firmware (1.0_0.9.1) works perfectly for me; with the new beta firmware, the 4G+ led on the modem is turned off and band aggregation is not supported.

 

Modem status:

 

Signal strength 100%

RSRP -87dBm

RSQR -10dB

SNR 23.8dB

 

  2  
  2  
#25
Options
Re:Archer MR600 V1
2022-11-02 18:45:20

Old beta firmware 1.1.0_0.9.1

4G+ enabled, band aggregation enabled.

 

 

New beta firmware 1.2.0_0.9.1

4G+ disabled, band aggregation disabled

 

 

(PosteMobile is a MVNO hosted by Vodafone).

 

  1  
  1  
#26
Options
Re:Archer MR600 V1
2022-11-04 03:51:47

  @ralphm24 

 

Hi, thank you very much for the feedback.

With the old beta firmware, are you using auto bands? or manually selected bands? and how about the new beta firmware?

 

In addition, are you testing with the same SIM card and at same location? Please also check if they are using the same APN profile settings.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#27
Options
Re:Archer MR600 V1
2022-11-04 15:48:29

Sunshine wrote

  @ralphm24 

 

Hi, thank you very much for the feedback.

With the old beta firmware, are you using auto bands? or manually selected bands? and how about the new beta firmware?

 

In addition, are you testing with the same SIM card and at same location? Please also check if they are using the same APN profile settings.

  @Sunshine 

 

With the old beta firmware I'm using manually selected bands (bands 3 and 20); same settings with the new beta firmware (but if I select "auto bands", nothing changes).

Same SIM card, same location and same APN profile settings.

Connection parameters provided by the ISP:

Network search mode: auto (no changes with "manual")

PDP type: IPv4

APN type: static

Username: NONE

Password: NONE

Authentication type: NONE

 

There is one thing to notice; if you look at the previous screenshots, you can see that, with the old beta firmware the ISP name is PosteMobile, while with the new beta firmware it is PosteMobileWAP. I don't know why.

 

 

 

  0  
  0  
#28
Options
Re:Archer MR600 V1
2022-11-09 13:09:43

  @Sunshine Hi. My carrier aggregation also does not work using this firmware.

  2  
  2  
#29
Options
Re:Archer MR600 V1
2022-11-10 00:38:06

  @Chazzypuk 

Same

  0  
  0  
#30
Options
Re:Archer MR600 V1
2022-11-10 07:24:37

  @Chazzypuk 

Same

  0  
  0  
#31
Options