New Release Archer MR600 V1
Hi All,
Since there are several beta versions for different issues on MR600(EU) V1, now we have made a new beta firmware to fix all the previous issues.
Here is the download link:
Modifications and Bug Fixes:
1. Fixed SMS related issue
2. Fixed the issue that Send button grayed out when replying USSD at second time
3. Fixed address reservation issue that the 10th item cannot be added
4. Fixed the issue that client device cannot download files bigger than 2GB
5. Added manual 4G band selection feature
6. Added OneMesh on/off switch
7. Add Ping feature as offline detection under 3G/4G Backup
It is highly recommended to install this firmware on Archer MR600(EU) v1 in the first place, and any feedback will be extremely appreciated. Thank you very much.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sunshine Good to see an EOL product gets such good supports, but what about our MR200 v5.2? I want to disable OneMesh.
- Copy Link
- Report Inappropriate Content
Thank you.
With the new firmware, i cannot get LTE+ any more. Only single band with slow speed.
I have bands 3, 7, 20 available. (Best are 3,7)
Individually they work. But if i select multiple manually, only one of them can connect. The same when I set it to auto, only one band connects.
2018-10-01 02:00:25 [5] 4G: init LTE module set flowstat [enableDataLimit 0 enablePaymentDay 1 paymentDay 1 limitation 0 warningPercent 90]
2018-10-01 02:00:25 [5] 4G: LTE Module: profile num [1] default profile [1] active profile [0]
2018-10-01 02:00:25 [5] 4G: DM: profile num [1] default profile [1] active profile [0]
2018-10-01 02:00:30 [6] 4G: USER: lte_sms_status_valid 3.
2018-10-01 02:00:30 [6] 4G: USER: Get ISP's profile now.
2018-10-01 02:00:30 [6] 4G: USER: GetCurrProf result is:ipver:2 staticApn:0 authType:2 pkgName:Sunrise profname:Sunrise apn:internet usr:internet psw:internet
2018-10-01 02:00:32 [6] 4G: LTE connection up
2018-10-01 02:00:32 [5] 4G: LTE internet connected.
2022-09-03 10:17:14 [6] 4G: USER: Network type is LTE PLUS.
2022-09-03 10:17:14 [6] 4G: USER: Network type is LTE.
2022-09-03 10:17:15 [6] 4G: USER: Network type is LTE PLUS.
2022-09-03 10:17:16 [6] 4G: USER: Network type is LTE.
2022-09-03 10:17:25 [6] 4G: USER: Network type is LTE PLUS.
2022-09-03 10:17:26 [6] 4G: USER: Network type is LTE.
2022-09-03 10:17:37 [6] 4G: USER: Network type is LTE PLUS.
2022-09-03 10:17:38 [6] 4G: USER: Network type is LTE.
2022-09-03 10:17:53 [6] 4G: USER: Network type is LTE PLUS.
2022-09-03 10:17:54 [6] 4G: USER: Network type is LTE.
2022-09-03 10:17:54 [6] 4G: USER: Network type is LTE PLUS.
2022-09-03 10:17:55 [6] 4G: USER: Network type is LTE.
2022-09-03 10:17:56 [6] 4G: USER: Network type is LTE PLUS.
2022-09-03 10:17:57 [6] 4G: USER: Network type is LTE.
2022-09-03 10:17:59 [6] 4G: USER: Network type is LTE PLUS.
2022-09-03 10:18:00 [6] 4G: USER: Network type is LTE.
2022-09-03 10:18:37 [5] 4G: [band scan] now will set band :0x1a0080800d5.
2022-09-03 10:18:38 [6] 4G: ERROR: 0x0000000F QMI_ERR_OUT_OF_CALL
2022-09-03 10:18:38 [6] 4G: ERROR: Get packet statistics failed (0).
2022-09-03 10:18:38 [6] 4G: USER: The network disconnected start autoconnect!
2022-09-03 10:18:38 [6] 4G: USER: Get ISP's profile now.
2022-09-03 10:18:38 [6] 4G: USER: GetCurrProf result is:ipver:2 staticApn:0 authType:2 pkgName:Sunrise profname:Sunrise apn:internet usr:internet psw:internet
2022-09-03 10:18:38 [6] 4G: USER: ModifyDefaultAttachProfileIP attach ip ver equal to profile
2022-09-03 10:18:38 [6] 4G: USER: Get ISP's profile now.
2022-09-03 10:18:38 [6] 4G: USER: GetCurrProf result is:ipver:2 staticApn:0 authType:2 pkgName:Sunrise profname:Sunrise apn:internet usr:internet psw:internet
2022-09-03 10:18:38 [6] 4G: ERROR: Bind mux port session 0 failed (0).
2022-09-03 10:18:38 [6] 4G: ERROR: Bind mux port session 1 failed (0).
2022-09-03 10:18:39 [6] 4G: USER: lte_sms_status_valid invalid .
2022-09-03 10:18:39 [6] 4G: USER: Get ISP's profile now.
2022-09-03 10:18:39 [6] 4G: USER: GetCurrProf result is:ipver:2 staticApn:0 authType:2 pkgName:Sunrise profname:Sunrise apn:internet usr:internet psw:internet
2022-09-03 10:18:39 [6] 4G: USER: lte_sms_status_valid 0.
2022-09-03 10:18:39 [6] 4G: USER: Get ISP's profile now.
2022-09-03 10:18:39 [6] 4G: USER: GetCurrProf result is:ipver:2 staticApn:0 authType:2 pkgName:Sunrise profname:Sunrise apn:internet usr:internet psw:internet
2022-09-03 10:18:39 [6] 4G: USER: lte_sms_status_valid 3.
2022-09-03 10:18:39 [6] 4G: USER: Get ISP's profile now.
2022-09-03 10:18:39 [6] 4G: USER: GetCurrProf result is:ipver:2 staticApn:0 authType:2 pkgName:Sunrise profname:Sunrise apn:internet usr:internet psw:internet
2022-09-03 10:18:39 [6] 4G: USER: Connected to the network!
2022-09-03 10:18:39 [6] 4G: ERROR: 0x0000000E QMI_ERR_CALL_FAILED
2022-09-03 10:18:39 [6] 4G: ERROR: Call end reason = 1.
2022-09-03 10:18:39 [6] 4G: ERROR: Verbose Call end reason = 210 type = 2.
2022-09-03 10:18:51 [6] 4G: USER: Get ISP's profile now.
2022-09-03 10:18:51 [6] 4G: USER: GetCurrProf result is:ipver:2 staticApn:0 authType:2 pkgName:Sunrise profname:Sunrise apn:internet usr:internet psw:internet
2022-09-03 10:18:51 [6] 4G: USER: Get ISP's profile now.
2022-09-03 10:18:51 [6] 4G: USER: GetCurrProf result is:ipver:2 staticApn:0 authType:2 pkgName:Sunrise profname:Sunrise apn:internet usr:internet psw:internet
2022-09-03 10:18:51 [6] 4G: USER: ip version changed ModifyDefaultAttachProfileIP Now.
2022-09-03 10:18:51 [6] 4G: USER: ModifyDefaultAttachProfileIP attach ip ver equal to profile
2022-09-03 10:18:51 [5] 4G: set LTE static IP connection needSetDefaultGw:1
2022-09-03 10:18:53 [6] 4G: USER: Network type is LTE PLUS.
2022-09-03 10:18:54 [6] 4G: USER: Network type is LTE.
- Copy Link
- Report Inappropriate Content
@Sunshine Tried this beta version. Manual Band selection worked for me . SMS issue resolved, The new on /off switches in One Mesh appear as presumed but with the switch on, the One Mesh page tells you that you have no one mesh items available, in both the Basic and Advanced Screens, Using Tether says I'm operating in One Mesh but I'm not totally confident that one Mesh is working correctly. Definitely a problem on the router side.so I have gone back to the Released firmware and one Mesh system working fine but I do miss the manual band selection and it was nice to have the SMS feature available on the Tether app. I'm sure when this bug is corrected and the next "official firmware" is released the version 1 MR600 will perform as expected. Please don't forget to add WPA3 to that release.
Dave
- Copy Link
- Report Inappropriate Content
I had to reboot the MR600 for the OneMesh change (Enable/Disable) to apply. Maybe you need to try that too.
And yes, WPA3 would be nice.
- Copy Link
- Report Inappropriate Content
I've just tried this new (beta) firmware today. There is no annoying "Confidential" watermark anymore! But, it's still fail again to get selected dual bands for 4G+ LTE (I think I saw the 4G+ mode activated just one or 2 seconds today, so it's "possible" but not stable?).
- Copy Link
- Report Inappropriate Content
Hi, thanks for the feedback.
I will let you know when there is any new firmware for MR200 V5.20 with OneMesh on/off switch.
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the feedback.
May I know which firmware you were using and were able to get 4G+? usually the carrier aggregation is decided by the base station, so we are unable to force the device to work on specific CA bands combinations from router side, that is why there might be still one band when selecting multiple bands manually.
If possible, could you please share with us some screenshots of the Advanced->Status page and Advanced->Network->Internet page when this new firmware and also with the previous firmware?
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the feedback.
May I know the model number and hardware version of your other OneMesh product? we will also run the same test with the same OneMesh product.
@Twincab @kernash In addition, previous beta firmware for MR600 V1 has no WPA3 as well, this new beta firmware is mainly merging all the previous beta firmware so that we could use one single firmware for different issues. I am afraid there is no plan to add WPA3 on MR600 V1, your understanding would be highly appreciated!
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the feedback.
May I know if you were getting dual band when using previous firmware and which firmware you were using? Actually the carrier aggregation is decided by the base station, so we are unable to force the device to work on specific CA bands combinations from router side, that is why there might be still one band when selecting multiple bands manually.
If previous firmware cannot get dual band either, it is highly recommended to confirm with your ISP which band conbinations are supported in 4G+ mode, and if you have any other LTE CAT6 product, you could also test with the same SIM card at same location to see if another product will work on that band conbinations or not.
- Copy Link
- Report Inappropriate Content
Hi Sunshine The range extender is a RE 200 (EU) ver 3.0 running firmware 1.1.4 Build 20210916 Rel. 36873 . Some additional thoughts. Previously I would use Tether connected to RE 200 to switch on OneMesh and the OneMesh router screen would would pick the RE200 showing mac address etc plus received signal strength. After Upgrading the MR600 with the new beta firmware I can now see the new on/off switch which indicates its on (presumably pick up from the position of the Tether RE200 OneMesh switch. The screen on the router shows the screen informing one about One Mesh etc but not the info of the connected RE200. Rebooting the router makes no difference. I tried switching off the switch on the router and rebooting but produces the same info screen for OneMesh. Switching One Mesh on again and rebooting same info screen.Tether however logged into the RE 200 says its still on. Trying to switch off via tether gives an error and won't switch off. Maybe there is a correct sequence that should be followed with the two OneMesh switches ie via Tether and Router which I'm not aware of and the two switches are fighting each other one on and one off. I fully agree with the status of 4G+ being controlled by the base station. Mine works on Band 3 and 28 no issues in automatic or after manually selecting the two bands when using the beta firmware.at all.Max download speed I get is 130Mbps which is what is expected from the isp.
Regards
Twincab
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 18066
Replies: 57
Voters 3
