Solution VR2100 Setup with Deutsche Glasfaser (DG)
Dear all,
since I needed ages to setup the internet for my VR2100v with Deutsche Glasfaser (DG) for FTTH I wantet just to share how I finally got it:
1. Physical: Connect the Lan-Cable to the WAN-Port of the VR2100v
2. Administration:Change the Advance > Operating Mode to WLAN-Router
3. Administration: Change the Basic > Internet to ISP List = New-Glasfaser (Germany), VLAN-Tag = Enable and Connection Type = Dynamic IP
Update 29.07.2022:
Now I got the VoIP also running and want to share the configuration:
1. Administration: Go to Advance > Telephony > Telephone numbers and add a new number as following:
Telephony provider: Other
Phone Number: area code (of your town without country) and phone number direct in a row without blank
Registrar address, authentification ID, password: As you got it from Deutsche Glasfaser
Advanced: Change nothing: Port 5060, Proxy's 0.0.0.0, enable register via outbound proxy
Via IPv6: Disable
Area Code Settings: Disable
Advanced Settings:
Bound Interface: Change to Any_WAN (Bestehende Internetverbindung)
The rest of the parameters don't need to be changed
2. Administration: Advance > NAT forwarding > ALG: Enable everything especially SIP and RTSP
Maybe other settings work as well, but the above did it.
Reminder: Where the internet works from the day they installed the hardware (NT) in your house, the telephony works first time at the day DG activates it respectively the day your old number moved from your old provider to DG.
I hope this is useful for someone..
Best regards