DSL Modem Routers Forums - Home Network Community

TroubleshootingVoIP will not connect on TP-Link modem router? Check this.

Some customers may encounter an issue when setting up the VoIP service on the TP-Link VoIP modem routers. Refer to this article to troubleshoot first on your own before reaching out to a tech support

VoIPInstallationHighlighted ThreadOfficial

By

Kevin_Z · Latest post 2024-08-04 14:24:50 by johndavidjohn22

9Helpful

13952Views

19Replies

TroubleshootingNo internet service after quick setup

Hi All, Occasional there is some feedback that there is no internet service after quick set-up. Since most of our DSL modem routers, such as VR400/VR600/VR2100, etc. support multiple working modes, we

Highlighted ThreadNBN ConfigurationOfficial

By

David-TP · Latest post 2024-03-07 10:44:21 by 1111ww1111

6Helpful

9793Views

8Replies

SolutionHow to disable Onemesh Hidden network on modem vr400 v3

hi i have same problem with modem archer vr400 v3. https://community.tp-link.com/en/home/forum/topic/271574?page=1 it have 2 hidden wifi network (2.4 GHz and 5 GHz) When will the new version of the pr

Highlighted ThreadOneMeshOfficial

By mehdi_08 · Latest post Monday by 4361462

60Helpful

9876Views

50Replies

New ArrivalArcher VX1800v: A Revolutionary Wi-Fi 6 VDSL Modem Router with EasyMesh Compatibility

With its sleek and classic desktop design, Archer VX1800v has led the VDSL modem routers into the cutting-edge era of Wi-Fi 6 technology. As a member of the DSL Gateway family, Archer VX1800v is also

Highlighted ThreadOfficial

By

David-TP · Latest post 2024-07-26 14:53:00 by tomycrosound

0Helpful

769Views

1Replies

SolutionVR300 | Errors (pkts) increases after ~ 12 hours of usage. Download bitrate drops down dramatically

Hello, have already post about this problem in this thread, but probably is better to create a new one since we are talking about a different model. Problem is that after ~ 12 hour of work the Errors

Highlighted Thread

By Stefano________ · Latest post 2024-03-18 02:27:14 by Sunshine

39Helpful

28363Views

127Replies

SolutionVirtual Server cannot be saved on Archer VR2100v

This Article applied to: Archer VR2100v(EU)_V1_201224 Issue Description/Phenomenon: When trying to configure and save the Virtual Server rules (or Port Forwarding), the web interface page will jump ba

Port ForwardingHighlighted ThreadOfficial

By

TP-Link · Latest post 2023-08-08 18:16:46 by Jim2345

2Helpful

2689Views

13Replies

SolutionModem routers that are set up to work with Sky and Now broadband

Is there a comprehensive list of new and old modem routers that are set up to work with Sky and Now broadband fibre to cabinet service?

Highlighted ThreadInstallation

By HarryStottle · Latest post 2023-07-21 07:54:45 by Slimanal3li

41Helpful

37888Views

26Replies

Virtual Servers (Port Forwarding) RANGE issue on TP-Link Archer VR1210v

Hi Everyone. I'm writing to report an issue I found regarding the "Virtual Servers" configuration into the "NAT Forwarding" section of the EVDSL Modem TP-Link Archer VR1210v. Below the information of

Port ForwardingRangeHighlighted Thread

By DavmoNet · Latest post 2022-11-12 22:20:31 by DavmoNet

5Helpful

1046Views

6Replies

Solution/Information: Traffic Monitoring slows down Etherneet Speed by factor 3 on Archer VR2100v

Hello all, today I was struggeling with very low speeds on the Archer VR2100v even all devices connected were supporting 1GBit/s Ethernet. The network speedtesting tool "iperf" were showing me approx.

Highlighted Thread

By opcodex64

2Helpful

483Views

0Replies

SolutionSettings for Croatian ISPs on Fiber and xDSL

Hi there i would like to contribute to TPLink Quick Setup as i seen you already have old ADSL settings for Hrvatski Telekom and some other ISPs and as i connected my VR400 and VR2100v to Croatian ISP

Settings ContributionHighlighted ThreadInstallation

By KarloVranjes

4Helpful

570Views

0Replies