Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

< Deco

Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Thackers

2022-03-07 18:42:51

Posts: 15

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-03-06

Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

2022-03-07 18:42:51

Hi all

I have a cisco 250 48 10/100 smart switch. I've had it 3 years and I purely plugged the unit in and have never altered any configuration .

would this switch work ok if it was hardwired direct from a Deco x 20 / x60 etc ? And the switch then fed all other decos around the property ?

I've no idea of the firmware as I've never touched the unit or whether this would need to be changed to work with he Decos?

2 Reply

David-TP

2022-03-08 08:01:00

Posts: 12438

Helpful: 1715

Solutions: 1196

Stories: 9

Registered: 2020-04-14

Re:Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

2022-03-08 08:01:00

@Thackers I haven't heard any feedback about this model-Cisco SF250-48 yet and I did see some feedback about Cisco SG220-26 and Cisco 4948-10G that failed to build the Ethernet backhaul. Nomrally IEEE 1905.1 protocol is required for the Ethernet backhaul but not all the users manual of switch have this information included so it is hard to give you an exact answer.

For more details about Ethernet backhaul, please refer to this link:

General questions about Ethernet Backhaul feature on your Deco

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.

Thackers

LV1

2022-03-08 20:41:26

Posts: 15

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-03-06

Re:Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

2022-03-08 20:41:26

Thanks @David-TP

am I correct in thinking if I run in AP mode then because all decos are hardwired after the cisco network switch Backhaul should work fine even if the protocol you mentioned isn't available on the cisco switch ?

Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

Deco compatibility including Backhaul with cisco 250 48 10/100 smart switch

Information

Voters 0

Tags