Deco x20 thinks it's 1969

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco x20 thinks it's 1969

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco x20 thinks it's 1969
Deco x20 thinks it's 1969
2022-02-03 18:46:00
Model: Deco X20  
Hardware Version: V2
Firmware Version: 1.1.1 build 20210723 release 57605

Last night I lost internet. ISP contacted (Ziply) and diagnostics were ok on their end. ISP address seems to be reaching the Deco, but nothing getting to devices on the network. Can connect to the Deco web interface but in System -> Time Settings, current time is December 31 1969. Tried firmware load from local bin file downloaded from tplink website. No luck. Traded a different Deco unit (I have 3) to use as main unit and internet was restored. Subnet mask was slightly different, so put back to 255.255.255.0. I ended up rebooting just to be clean but now this 2nd Deco shows it's 1969 again. Some update being pushed is bricking the network, likely due to the system time issue. Tried changing continent/region but no help. I have 1 unit left - not sure I should risk another swap if the same
result happens. Need help.

  3      
  3      
#1
Options
2 Reply
Re:Deco x20 thinks it's 1969
2022-02-03 20:21:07
Slight correction... H/W ver is 2.6
  0  
  0  
#2
Options
Re:Deco x20 thinks it's 1969
2022-02-08 11:48:17

@Blue45 

Thank you for your time and patience.

Have you tried to change to another time zone and change it back to LA again to see what happened?

And please refer to this link to change the DNS server on Deco to have a look:

How to change DNS server settings on my Deco?

  0  
  0  
#3
Options