WIFI 2.4 and 5ghz Freeze until Archer VR 400 is rebooted
In the last few months when I use 2.4 and 5 GHz frequency on the Wi-Fi every two or three days the router network traffic completely freezes and WIFI asks from SSID password again. if I reboot all seems normal but I do get loads of errors in the traffic monitor on both wifi frequencies
Also, I have noticed that when I switch off the 2.4 GHz Wi-Fi the Internet user interface becomes very responsive unlike when both frequencies are switched on. The same happens if I switch off only the 5 GHz frequency both are set to an auto channel. I also get faster traffic 10MB/s on LAN 4 when one of the wifi frequencies is turned off but I do get lots of drops (not sure if related see below). It would be great to keep it like this but I do have 2.4 only devices which I cannot use at present so t would be great to have some support.
Traffic Monitor List
Refresh
Reset
Interface Name | Bytes | Pkts | Errs | Drops |
---|---|---|---|---|
LAN4 | 7.107GBytes Rx 3.552GBytes Tx |
6.635MPkts Rx 7.622MPkts Tx |
0Pkts Rx 0Pkts Tx |
2.309KPkts Rx 0Pkts Tx |
LAN3 | 0Bytes Rx 0Bytes Tx |
0Pkts Rx 0Pkts Tx |
0Pkts Rx 0Pkts Tx |
0Pkts Rx 0Pkts Tx |
LAN2 | 0Bytes Rx 0Bytes Tx |
0Pkts Rx 0Pkts Tx |
0Pkts Rx 0Pkts Tx |
0Pkts Rx 0Pkts Tx |
LAN1 | 0Bytes Rx 0Bytes Tx |
0Pkts Rx 0Pkts Tx |
0Pkts Rx 0Pkts Tx |
0Pkts Rx 0Pkts Tx |
Wi-Fi_5G | 5.413GBytes Rx 74.329GBytes Tx |
39.606MPkts Rx 60.091MPkts Tx |
0Pkts Rx 0Pkts Tx |
1Pkts Rx 0Pkts Tx |
pppoa_0_38_0_d | 75.359GBytes Rx 10.207GBytes Tx |
62.951MPkts Rx 41.214MPkts Tx |
0Pkts Rx 0Pkts Tx |
0Pkts Rx 1.635MPkts Tx |