Router Archer VR 400
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi my name is Konstantinos and I am from Greece. I bought Archer VR400 and does not synchronize. I have 50GBps VDSL2 line with static IP.My provider is Forthnet.I talk with tp-link Greece support but they couldn' t do anything more to synchronize.Any suggestion?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
1. Please try to unplug the phone line and plug it back, and then check the DSL light.
2. If there is a splitter, please remove it and connect the phone line to the DSL port directly.
3. Please reset the VR400 and try again; with the modem router powered on, you can hold the reset button for 10s until all the leds come on momentarily and then you can let it go.
4. Did you contact Forthnet to check the line quality?
5. If possible, we suggest you to use another modem to do a comparison analysis.
Thanks for your reply in advance, and have a great day.
- Copy Link
- Report Inappropriate Content
Kevin_Z wrote
1. Please try to unplug the phone line and plug it back, and then check the DSL light.
2. If there is a splitter, please remove it and connect the phone line to the DSL port directly.
3. Please reset the VR400 and try again; with the modem router powered on, you can hold the reset button for 10s until all the leds come on momentarily and then you can let it go.
4. Did you contact Forthnet to check the line quality?
5. If possible, we suggest you to use another modem to do a comparison analysis.
Thanks for your reply in advance, and have a great day.
I have already tried all of these procedures.Forthnet told me the line is ok because their router synchronized and have internet access.Only a woman-network administrator from my provider told me that there is a rule in the contract said with other network material there is the posibility not to have access to their services. I live on 3rd,on 1st floor they have cosmote (other provider) ADSL 24mbps and it is connectly great. Also the administrator told me that maybe one to one NAT will be the solution.I'll try and report here.Thanks!!!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks for your updates, glad to hear that you solved it.
Could you please tell more information about the one to one NAT? I assume that it will help people who in need.
Thanks for your reply in advance, and have a nice day.
- Copy Link
- Report Inappropriate Content
I am trying to connect to my network via openvpn as the documentation suggets and i get
Tue Nov 05 08:55:18 2019 WARNING: No server certificate verification method has been enabled.
Any suggestion?
- Copy Link
- Report Inappropriate Content
Hello, try to enable OpenVPN server first and then generate the certification.
Any updates, please let us know.
- Copy Link
- Report Inappropriate Content
I was trying to connect from the same network!!! From outside everything connects perfectly.Thanks and have a nice day!!!
- Copy Link
- Report Inappropriate Content
Do you mean that you want to connect the local devices which have been connected to the router to the VPN server?
May I know why do you want to do so? The OpenVPN make outside devices can access the local resources, while if the devices are local devices already, why do you want to connect to the VPN server?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1780
Replies: 8
Voters 0
No one has voted for it yet.