Solution VR300 | Errors (pkts) increases after ~ 12 hours of usage. Download bitrate drops down dramatically
Hello,
have already post about this problem in this thread, but probably is better to create a new one since we are talking about a different model.
Problem is that after ~ 12 hour of work the Errors (pkts) count moves from zero and goes wild (after this night was around ~1200000 ).
The speed of download bitrate dramatically start to decrease as well.
The only 2 found solution is either to restart the modem or unplug and replug the vdsl cable to reset internet connection.
after a reboot the situation is this one [ full performance in pagespeed (40 mbps down, 7.7 mbps up) ]
After ~12 hours the errors start to spawn and the download rate decreased to less than 4 mbps download (!!), upload value is the same.
Other Notes:
Am not using any telephone nor dsl filter, just the vdsl cable connect directly to the router.
The problems happens also for my ethernet connected Desktop PC (errors pkts + download speed drammaticaly decreased)... this is definitely not only a WiFi issue.
Seems also that this problem happens also for different model of tp-link modem router eg:
https://community.tp-link.com/en/home/forum/topic/243294
https://community.tp-link.com/en/home/forum/topic/263338
https://community.tp-link.com/en/home/forum/topic/271298
https://community.tp-link.com/en/home/forum/topic/209588
https://community.tp-link.com/en/home/forum/topic/240008
In none of these thread there is a solution.
Can anyone help me?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, have you tried the beta firmware on the first link:
Archer VR300(EU) V1.2-20211020
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP I noticed that original poster didnt reply to you David. However I have a AC1200 (Vr400) and have been using the Beta Firmware, as you can see there is still lots of errors happening.
Anyway i have decided to return this device to Amazon due to these Errors and also I do not like the QOS on the router!
I have returned to the W9970 which has proper bandwidth management and is more stable.
- Copy Link
- Report Inappropriate Content
@TP-Link same problem my router model is vr400 v2
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Stefano________ للاسف مودام جيد لاكن سوف يتم اخلي عنه غير متوفر فيه خصائص اكثر عن خط مثل fast et interleved وخصائص اكثر غير متوفرة ومن احسن يجرة تغيير سياسة وترك مجال للعميل وشكرا
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for your time and patience.
There is a new beta firmware updated on the first page and please check whether it improved your current issue:
Archer VR300(EU) V1.2-20220325
Best regards.
- Copy Link
- Report Inappropriate Content
@TP-Link نفس المشكل
- Copy Link
- Report Inappropriate Content
Hello, I'm having the same issue as others with the Errors (pkts).
Here's the screen.
I've tried to download the beta firmware but I got an error 4503.
This is the firmware I'm using atm - 1.4.0 0.9.1 v00a1.0 Build 210917 Rel.50331n
And this is the hardware version - Archer VR400 v3 00000000
Could you please let me know if there is any other version of the beta firmware I can download?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 30872
Replies: 121