Test Signal GUI for Archer MR600
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello TP-Linkers,
As I am working froma remote area, I planned to buy a Archer MR600, such that I can use my SIM and have a better reception due to its MIMO Tech & band locking provision.
With the router antenna, it gives me speed of max 14 Mbps.
I bought LPDA 12dBi External Antennas. Got it connected.. Speed is ok around 18Mbps.
The MR600 does has RSRP/RSRQ/SNR under Advance tab but it takes more time to refresh on Admin UI.
I also got a reference to check the better signal values.
|
|
RSRQ |
RSRP |
SNR |
| Excellent |
> -5 |
> -84 |
> 12.5 |
| Good |
-9 to -5 |
-85 to -102 |
10 - 12.5 |
| Fair |
-12 to -9 |
-103 to -111 |
7 - 10 |
| Poor |
< -12 |
< -111 |
< 7 |
But I havent figured out the best position of the external Antennas. After making adjustment to entennas, I have to wait for few minutes to get the speed check.
I request TP-Linkers, to provide a Test Signal feature in their Router / Tether App as Huawei does in MY AI Life App. So that it will be easy to configure the antennas for better reception.
Hope you understand the pain in identifying the best location for the best signal for your router to work with.
Best,
Abhishek Pandey
