TP-Link_9FAA laggs every 2 minutes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link_9FAA laggs every 2 minutes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link_9FAA laggs every 2 minutes
TP-Link_9FAA laggs every 2 minutes
2021-01-28 18:38:51 - last edited 2021-01-29 11:14:43
Model: Adapter  
Hardware Version: V19
Firmware Version:

Sorry guys, I neither know the Hardware Version nor the Firmware Version. Furthermore, the Model is the TP-Link_9FAA, not an Adapter but I just couldn´t find it in the Dropdown menu.

I just want to know whether someone can help me because the TP-Link generally works fine but has short laggs of 3-8 seconds every couple of minutes. During those seconds the internet is completely down and e.g. every Zoom-Video stops. This is really annoying, especially in those meetings.

 

Can anyone help me? I´d really appreciate that.

Thanks in advance! 

  0      
  0      
#1
Options
2 Reply
Re:TP-Link_9FAA laggs every 2 minutes
2021-01-29 02:07:12 - last edited 2021-01-29 11:14:43

@tomjb 

 

Thank you for posting on the TP-Link Community.

 

Can you please kindly confirm again the model number of the TP-Link device? You may find it on the device label or sticker, where shows you a Model Number/Model No.

 

If the wireless connection gives you small lags, please try to modify the wireless settings first, try to run a Wi-Fi analyzer to verify which 2.4G/5G channel is clearer, then try the channel, you can also change the 2.4G channel width to 40MHz, 5G channel width to 80MHz, change security to WPA/WPA2-Personal, WPA2-PSK/AES, then reboot it and confirm.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:TP-Link_9FAA laggs every 2 minutes
2021-01-29 06:46:44 - last edited 2021-01-29 11:14:43

@Kevin_Z 

 

Model: TL-MR6400

 

Hey again, I'm running a wired connection via LAN. Can you also give me advice with that?

  0  
  0  
#3
Options