TL-MR6400 vers. 4.0 scollegato

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-MR6400 vers. 4.0 scollegato

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-MR6400 vers. 4.0 scollegato
TL-MR6400 vers. 4.0 scollegato
2020-10-27 23:55:44 - last edited 2020-10-29 02:22:37
Model: TL-MR6400  
Hardware Version: V4
Firmware Version:

Da questa mattina il mio TL-MR6400 vers. 4.0 non dà più segnale ne via cavo ne wi-fi nonostante dal display risulta tutto ok.

La mia versione firmware è: 1.16.0 0.9.1 v0001.0 Build 191223 Rel.66638n

La mia versione Hardware: TL-MR6400 v4 00000002

Cosa posso fare per risolvere il problema?

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-MR6400 vers. 4.0 scollegato-Solution
2020-10-29 02:22:13 - last edited 2020-10-29 02:22:37

@Andrew_F 

Good day,

Thanks a lot for your time and patience.

I would reply in English and hope you do not mind.

Did the internet and 4G signal light still lit up?

Have you tried to reset the modem by holding the reset pinhole for the 10s?

Have you put the SIM into the smartphone to see If it is still working on the phone?

If possible, please log into the modem via 192.168.1.1 and check if there is any internet IP address;

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:TL-MR6400 vers. 4.0 scollegato-Solution
2020-10-29 02:22:13 - last edited 2020-10-29 02:22:37

@Andrew_F 

Good day,

Thanks a lot for your time and patience.

I would reply in English and hope you do not mind.

Did the internet and 4G signal light still lit up?

Have you tried to reset the modem by holding the reset pinhole for the 10s?

Have you put the SIM into the smartphone to see If it is still working on the phone?

If possible, please log into the modem via 192.168.1.1 and check if there is any internet IP address;

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options