address reservation not working!
I have noticed that the address reservation is not working as expected! completely ruining my IoT setup! can you please help? when the router reboots, almost all address reservations don't update to the ip specified.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, do you mean tha clients cannot get specified IP address once you reserved the IP address and reboot the router? If so, except address reservation, you need setup IP&MAC binding to make clients get specific IP address.
Below is the instruction: https://www.tp-link.com/support/faq/1671/
While if the address reservation function does not work properly, please ensure that there is special character/blank space existed in the description.
May it help.
- Copy Link
- Report Inappropriate Content
@F0si Try to change description that it's not containing spaces (replace them with '_' or something else) at least this helps with Archer C9 with actual firmware.
- Copy Link
- Report Inappropriate Content
Hello, do you mean tha clients cannot get specified IP address once you reserved the IP address and reboot the router? If so, except address reservation, you need setup IP&MAC binding to make clients get specific IP address.
Below is the instruction: https://www.tp-link.com/support/faq/1671/
While if the address reservation function does not work properly, please ensure that there is special character/blank space existed in the description.
May it help.
- Copy Link
- Report Inappropriate Content
@Kevin_Z same for me see this post
address reservation doesn't working and it's a big issue for a router !!
- Copy Link
- Report Inappropriate Content
@Kevin_Z TQ. It helped!
- Copy Link
- Report Inappropriate Content
@drtamil How did you solve this problem? I did not quite understand the solution 🤔
- Copy Link
- Report Inappropriate Content
I am using RE605 and enable the DHCP. I had mapped IP to MAC on some addresses, and it doesn't work. I used a simple text description without any special character (Cap-letter+small-Ltr+integer) for the description part. Please help
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 7591
Replies: 6
Voters 0
No one has voted for it yet.