Archer VR2800 error messages when trying to set up 2.4GHz SSID
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
A new VR2800 with problems with setting up a 2.4 GHz SSid - All the details entered correctly but when I go to save I get Error Code 1 - Internal EWrror and then Error 80002 - unknown error. The 5GHz SSiID set up Ok and is working, as is a LAN connection.
HELP! Mike
@Kevin_Z I have used the reset button a couple of times, as well as turning power off and on - makes no difference. I have also tried to set up a 2.4GHz netwrk in both the basic and advanced setting. No change with Internal Error 1 followed by Unknown Error 80002 which results in no network appearing. When I first set up the modem yesterday my 2.4 network was accessible but after an hour or two disappeared with subsequent attamptes to reinstate it giving the error messages. Meanwhile the 5 GHz network is working OK - no problems.
I am including 3 screen shots of the setting in boththe Basic and Advanced sections.
My feeling is that there is an internal problem with the modem and the 2.4GHz area has failed - but if there is something obviously wrong in the setup I haven't spotted I will be delighted not to have to return the modem/router. Fortunately I did set up the 5GHz side to cover g, n and ac so my wife's ancient laptop still connects.
cheers, Mike
PS running Windows 10
