Home Network Community > 5G/4G Wi-Fi Routers/MiFi > [PROBLEM SOLVED!] Portforwarding Failure - TL-MR3420 V3
< 5G/4G Wi-Fi Routers/MiFi

[PROBLEM SOLVED!] Portforwarding Failure - TL-MR3420 V3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

[PROBLEM SOLVED!] Portforwarding Failure - TL-MR3420 V3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[PROBLEM SOLVED!] Portforwarding Failure - TL-MR3420 V3
[PROBLEM SOLVED!] Portforwarding Failure - TL-MR3420 V3
2019-04-16 01:39:42 - last edited 2019-04-24 01:03:18

TL;DR: portforwarding does not work although i have done everything i can imagine to make it work. pls help. Formal version below.

 

Router = TL-MR3420 V3

 

Firmware Version:

3.16.9 Build 160412 Rel.45197n

Hardware Version:

MR3420 v3 00000000
 
 
Dear Ladies and Gentlemen,
 
Portforward or DMZ seems not to work on the described router.
Service is not reachable from "outside" (Internet).
If i plug the UMTS/3G Modem (Usb-Stick) straight into my computer, my service is properly reachable from outside as it should be.
If it is connected to the router, it won't be reachable from "outside" (Internet).
Inside the LAN, the service is reachable properly.
 
What i have tried so far - without success:
- list computer with running service as DMZ-Host
- add "Virtual Server"  ("Forwarding" Menu)
- add Port-Triggers ("Forwarding" Menu)
- change Firewall Status of router ("Security" Menu)
- change IP-adress for LAN
- assign static IP to computer with running service
- disable DHCP
- change port for remote management
 
I furthermore noticed in the DMZ menu there is a note saying
" Note:    Make sure the nat is enable if you want the DMZ configuration take effect. "
Where / how can i make sure the NAT is enabled?
 
 
I cannot find the option described in this link which shows the green UI: https://www.tp-link.com/us/support/faq/540/
 
I am looking forward to read from you.
 
 
 
 
 
 

 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Re:Re:Re:Re:Portforwarding Failure - TL-MR3420-Solution
2019-04-23 07:16:17 - last edited 2019-04-24 01:03:18

Hi,

 

Thanks for your reply, I emailed you the instruction to update the firmware; please notice your inbox.

 

After that, please check whether it works.

 

Any updates, just let me know. 

 

Good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#6
Options
Re:Re:Re:Re:Re:Re:Portforwarding Failure - TL-MR3420-Solution
2019-04-23 15:43:07 - last edited 2019-04-24 01:03:33

The firmware you sent me solved the problem, portforwarding now works properly. Thank you very much.

Here is a photo of my happy router, it has a message for you

 

Recommended Solution
  0  
  0  
#7
Options
10 Reply
Re:Portforwarding Failure - TL-MR3420
2019-04-16 11:32:45

Hi,

 

When you login to the router interface, could you please send us a screenshot on the Advanced-->status page where there shows the Internet and LAN information?

 

 

Here is a guide about how to enable DMZ: https://www.tp-link.com/en/support/faq/1987/

 

What is the device that you want to enable DMZ for? 

 

Thanks in advance, have a nice day!

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Re:Portforwarding Failure - TL-MR3420
2019-04-16 16:36:44 - last edited 2019-04-17 22:46:38

Advanced --> Status

 

Thank you for the link to the guide, however i found that page already and gave it a try, it did not work (i 1st gave normal portforwarding a try before setting the whole PC to DMZ).

The device i want to enable DMZ for is a regular PC, i have a webserver running there (it is not a configuration issue on the PC as when i connect the datastick directly without router to it, the webserver is reachable from the internet; the firewall of the PC is configured properly).

  0  
  0  
#3
Options
Re:Re:Re:Portforwarding Failure - TL-MR3420
2019-04-19 03:26:19

Hi,

 

What is the IP address and default gateway of this PC? Below is the instruction to find them:

https://www.tp-link.com/en/support/faq/838/ 

 

Meanwhile, in the same network, please test whether you can access it with your PC's IP address and port number;

 

meanwhile, you can use the WAN IP plus port number to test.

 

Besides, please use telnet to test:

1. in the same network, please go to run—cmd—telnet lan ip port number 

2. in external network, please run—cmd—telnet wan ip port number

Note: Please show us the pictures of the test results.

 

Good day. 

 


 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Re:Re:Re:Portforwarding Failure - TL-MR3420
2019-04-20 01:10:35 - last edited 2019-04-20 01:32:07

Kevin_Z wrote

Hi,

 

What is the IP address and default gateway of this PC? Below is the instruction to find them:

https://www.tp-link.com/en/support/faq/838/ 

 

IP 192.168.0.2

Gateway 192.168.0.1

 

 

Meanwhile, in the same network, please test whether you can access it with your PC's IP address and port number;

yes, local and from lan works fine

 

 

meanwhile, you can use the WAN IP plus port number to test.

when i enter the WAN-IP into a browser it shows the webinterface of the router. this only works in the same network as the router

 

if i enter the WAN-IP from an external network there is no response

 

Besides, please use telnet to test:

1. in the same network, please go to run—cmd—telnet lan ip port number

works fine

2. in external network, please run—cmd—telnet wan ip port number

fails

Note: Please show us the pictures of the test results.

 

Good day. 

answers in red; added images

 

additional notes: portscanner showed router has beside webinterface on port 80 a listening service on port 22 (available only from LAN)

 

 

 

 

EDIT:

it seems this user has the same problem

"TL-MR3420 Ver:3.0 Port Forwarding not working"

https://community.tp-link.com/en/home/forum/topic/92070?page=1&t=2018%2F10%2F18%2003%3A49%3A20%20%2B0000

 

EDIT2:

this user aswell

TL-MR3420 v3 is not port forwarding

 

  0  
  0  
#5
Options
Re:Re:Re:Re:Re:Portforwarding Failure - TL-MR3420-Solution
2019-04-23 07:16:17 - last edited 2019-04-24 01:03:18

Hi,

 

Thanks for your reply, I emailed you the instruction to update the firmware; please notice your inbox.

 

After that, please check whether it works.

 

Any updates, just let me know. 

 

Good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#6
Options
Re:Re:Re:Re:Re:Re:Portforwarding Failure - TL-MR3420-Solution
2019-04-23 15:43:07 - last edited 2019-04-24 01:03:33

The firmware you sent me solved the problem, portforwarding now works properly. Thank you very much.

Here is a photo of my happy router, it has a message for you

 

Recommended Solution
  0  
  0  
#7
Options
Re:Re:Re:Re:Re:Re:Re:Portforwarding Failure - TL-MR3420
2019-04-24 01:01:51

Wow, it is soooooo cute ^_^ Thanks for your valued reply, it is glad to hear that you solved it finally. Congrats!

 

If need any further help in the future, do not hesitate to contact us.

 

Have a nice day. 

 

 

Portforwardguy wrote

The firmware you sent me solved the problem, portforwarding now works properly. Thank you very much.

Here is a photo of my happy router, it has a message for you

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#8
Options
Re:[PROBLEM SOLVED!] Portforwarding Failure - TL-MR3420 V3
2020-06-15 07:36:30

@Portforwardguy 

 

Hi,

 

i am using this router with doungle connected. Not able to configure the Port Forwarding. Below are the details. 

 

3G/4G Wireless N Router
Model No. TL-MR3420

Firmware Version:   3.15.9 Build 140912 Rel.35984n
Hardware Version:   MR3420 v3 00000000

 

 

Please help  me to configure the port forwarding and am using canyouseeme.org to check the open ports.    showing me as  Reason: Connection timed out

 

  0  
  0  
#9
Options
Re:Re:Re:Re:Re:Portforwarding Failure - TL-MR3420
2020-11-29 15:53:20

@Kevin_Z 

hi Kevin

i have a router TP-Link W3420 v2  :

and i have a IP Fixe  but th port forwarding is failed , i am very tired please help me thank you

Firmware Version:
3.16.9 Build 150319 Rel.60489n

Hardware Version:
MR3420 v2 00000000
  0  
  0  
#10
Options
Re:Re:Re:Re:Re:Portforwarding Failure - TL-MR3420
2020-11-29 16:06:55
@Kevin_Z hi Kevin i have a router TP-Link W3420 v2 : and i have a IP Fixe but th port forwarding is failed , i am very tired please help me thank you Firmware Version: 3.16.9 Build 150319 Rel.60489n Hardware Version: MR3420 v2 00000000
  0  
  0  
#11
Options

Information

Helpful: 0

Views: 2738

Replies: 10

Related Articles
 Portforwarding Failure - TL-MR3420 V3
258 0
Ping / Portforwarding
734 0
Port forwarding [SOLVED]
986 0
Portforwarding 37777,377778 issue
630 0
 Portforwarding (server)
576 0
 portforwarding not working
307 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.