Hi All,

So I might have it all wrong but I guess I will learn it here.

I have a Deco M4 network setup straight from my router.

Within the Deco app I configured some port forwarding for both my pc and ps3 meaning they get a static ip on the network (right?) and the specific ports are open since my NAT connection to an old game is moderate / type 2.

After a lot of tries, flipping switches of SIP ALG, UTNP and reboots this still didn't work and the NAT didn't change.

Some people told me I shouldn't do these settings on the Deco network / Deco's but on the router. 
 

The problem with that is my router's LAN subnet is build up different then my Deco network. 
 

Let’s say my PC has ip 192.168.1.102 on my Deco network but since my router has an subnet build up like 192.168.0.1 I can only forward ports to 192.168.0.102 on my router and not to 192.168.1.102

FYI the firmware is updated to the latest. Also important that before i installed the Deco's the NAT was open, That's the reason I was trying to see where to fix it in the Deco app.

Again probably my knowledge is not what it should be but I am eager to learn. 
 

Thanks in advance!