Home Network Community > 5G/4G Wi-Fi Routers/MiFi > Deco X50-5G or Archer NX200
< 5G/4G Wi-Fi Routers/MiFi

Story Deco X50-5G or Archer NX200

Story Deco X50-5G or Archer NX200

StoryDeco X50-5G or Archer NX200
Deco X50-5G or Archer NX200
2024-08-16 08:11:37 - last edited 2024-11-07 07:56:12
Tags: #Highlighted Thread #Official
Model: Archer NX200   Deco X50-5G  
Hardware Version:
Firmware Version:

As Mobile service providers continue to roll out the 5G network, upgrading from traditional LTE routers to the latest 5G Technology is becoming increasingly unavoidable. To fully utilize the high-speed capabilities of 5G, how can users identify the ideal 5G router that aligns with their home network requirements?

 

There are two major 5G router branches:

  Deco 5G Routers   Archer 5G routers
Wi-Fi 6
 		 Deco X50-5G (AX3000)

The main difference is in the wireless specifications and

the software features currently supported.

For a comprehensive comparison, kindly refer to the specifications.

 Archer NX200 (AX1800)
Deco X80-5G (AX6000)
Wi-Fi 7 Deco BE65-5G (BE9300) /

 

 

Here we take Deco X50-5G and Archer NX200 for example:

Deco X50-5G (AX3000)

Archer NX200 (AX1800)

5G: N1/N3/N5/N7/N8/N20/N28/N38/N40/N41/N77/N78
4G FDD-LTE: B1/B3/B5/B7/B8/B20/B28/B32
4G TDD-LTE: B38/B40/B41/B42/B43
3G: B1/B5/B8

1× 2.5 Gigabit port

2× 1 Gigabit ports (WAN/LAN auto-sensing)

1 × Nano SIM Card Slot
2 × External SMA-F Antenna Interface

1 × 1 GigabitLAN/WAN Port
2 × 1 Gigabit LAN Ports
1 × Nano SIM Card Slot
2 × External SMA-F Antenna Interface

Deco Mesh

  • Work well with other Deco models

EasyMesh

  • Establish a Mesh system with other EasyMesh-supported extenders

Deco APP

Tether APP

Web Management
HomeShield Security Kit
  • DoS, SPI Firewall, IP and MAC Address Binding, Access Control
  • QOS-Prioritizes network traffic by device or application
  • Parental Control
More supported software features More supported software features

 

 

How to find which one is a better fit?

 

Identify the essential factors that need to be met in addition to supporting 5G mobile service.

  • Prefer web management or APP control?

If you are frequently web management users, Archer NX200 should be your first choice.

 

  • Already have some Deco units or EasyMesh extenders?

Currently, Deco routers are unable to establish a Mesh system with EasyMesh devices. Therefore, if you already have other Deco Mesh units, Deco X50-5G would be the preferable choice; otherwise, consider Archer NX200.

 

  • Need a specific advanced software feature?

If you want separate SSIDs for 2.4GHz and 5GHz, Archer NX200 will be better.

Or Trying to establish a Mesh system via Wi-Fi / Ethernet Backhaul, Deco X50-5G will be an excellent choice for Whole Home Mesh Wi-Fi.

 

If you still can’t choose whether Deco X50-5G or Archer Nx200, please leave a comment and describe your dilemma.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  2      
 
  2      
 
#1
Options
7 Reply
Re:Deco X50-5G or Archer NX200
2024-10-15 13:16:19

  @David-TP 

 

Hello

 

i want buy 5g router but i want more info about Carrier Aggregation (CA) and support 4x4 mimo or not please i need this detail befor buy

  0  
  0  
#2
Options
Re:Deco X50-5G or Archer NX200
2024-11-08 08:15:15

 

Shulzmark wrote

  @David-TP 

 

Hello

 

i want buy 5g router but i want more info about Carrier Aggregation (CA) and support 4x4 mimo or not please i need this detail befor buy

 

@Shulzmark 

 

The newly released Archer NX600 supports Carrier Aggregation (CA) and 4x4 mimo. However, I'm not sure if it's available in your region. You may check with the local resellers or online stores.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:Deco X50-5G or Archer NX200
2024-11-11 04:36:22 - last edited 2024-11-11 04:38:03

  @David-TP I am not getting the data in the Tether App for Total Traffic Usage by each client who are connected to my Archer NX200. Secondly, May I know if there is a way to limit the speed for each client connected to my Archer NX200. I can limit the speed for the clients connected to my another router which is Archer AX72 but I cannot find any such option in the tether app for Archer NX200. If anyone know please help.  Thank you.

  0  
  0  
#4
Options
Re:Deco X50-5G or Archer NX200
2024-11-12 01:48:53

  @UserNX200 

Hi, Thank you very much for the message.

Archer NX200 doesn't support "Speed Limit" per device like Archer AX72.

 

As for the "Traffic Usage" on the Tether APP, I think Archer NX200 would only calculate the total data usage of the whole network.

On the web interface of Archer NX200, there is a feature called "Traffic Statistics" under Advanced>System tools>Traffic Statistics, would it list the detailed Total Bytes per device?

Thanks again and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:Deco X50-5G or Archer NX200
2024-11-12 04:05:12 - last edited 2024-11-12 04:08:24

  @David-TP Thank you for your prompt reply. As I want to do the speed limit for each client connected and see their total data usage monthly, Can I use Archer AX72 as WiFi extender for NX200 using a LAN cable? If it is possible then I will provide the login credentials to the clients for Archer AX72 and not for the NX200. I understand that If I use EasyMesh function to connect NX200 with Archer AX72 then the clients can also connect to NX200 as well and in that case I may not be able to speed limit. Thank you. 

Best regards.

  0  
  0  
#6
Options
Re:Deco X50-5G or Archer NX200
3 weeks ago

  @David-TP Does NX200 support 464XLAT technology ? , I know for sure Deco X50-5G hasn't added 464XLAT yet .
 Also what category router is NX200 when using it as a 4g router ? 

  0  
  0  
#7
Options
Re:Deco X50-5G or Archer NX200
3 weeks ago

  @Knight2k 

Hi, Archer NX200 hasn't added 464XLAT technology either.

For the other question-" what category router is NX200 when using it as a 4g router? ", I'm not sure what you're trying to ask exactly. Can you add more details?

Wait for your reply and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.
  0  
  0  
#8
Options

Information

Helpful: 2

Views: 4183

Replies: 7

Tags

Highlighted Thread Official
Related Articles
 Archer NX200 vs Deco X50-5G
5648 0
What's the difference between Deco X50-5G V2 and Archer NX200
385 0
 Difference Deco X50 5G and Archer NX200
1382 0
 Archer NX200 cannot connect to the Internet in 5G Only mode
292 0
 Archer NX200 kann im 5G Only-Modus mit deutschem O2 keine Verbindung zum Internet herstellen
191 0
No 5G option on my Deco x50-5g
1453 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.