Access Points
The Access Point products are mainly designed to establish a wireless network, and, with multiple working modes, you can also expand your existing wireless network or provide internet access to your wired only devices. In this section you can say hello to other members, ask, answer or discuss technical topics regarding Access Points.
Access Points
The topic was originally posted by Kevin_Z in TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode This Article Applies to: TL-WA3001 V1 Overview We hope to offer you a chance to experie
OfficialHighlighted Thread
2Helpful
564Views
I am attempting to set up and configure my access point TL-WA801ND. I have ran an ethernet cable from my router/modem in my house to my workshop about 150 feet away (may be up to 200 feet of cable). I
By
Airborne2
0Helpful
72Views
>> This is for TL-WA3001 - There is still no option to select this device in the drop-down list << I have three TL-WA3001 and I would like to assign them a unique device name (vs. just IP address), bu
Multi-SSID ModeCustom Device Name
By
bitmerlin
0Helpful
62Views
used in range extender mode on my GUEST network it allows access to other devices PROBLEM: when I extend the ROUTER guest network using the TL-WA1201, then the TL-WA1201 guest network allows access to
Range Extender Mode
0Helpful
110Views
Just purchased an AC1200 TL-WA1201 to extend wireless range of an existing AC1750 main router several rooms away. I can connect the TL-WA1201 to the AC1750 with a WIRED Ethernet cable. So what mode sh
Range Extender ModeMulti-SSID Mode
0Helpful
139Views
Archer AX95 Issues with Disconnects and Internet Outages Details: • Model: Archer AX95 • Firmware: 1.1.6 Build 20241203 rel. 64133 • Duration of Use: Less than a year • Issue Start Date: About a week
0Helpful
320Views
Both my laptops are powered by ethernet cable connected to my modem. I bought the TP-link in hope to power my cell phone via the access point instead of the modem WI-FI to avoid corrupting my ethernet
By
wellnesscafe
· Latest post 2024-11-11 00:24:41
by terziyski
0Helpful
207Views
Just bought an AX3000 access point and I wanted to check the firmware but there is a little bit of a conflict. The stickers on the box and te bottom of the device state that it is a version 1.6. But w
0Helpful
202Views
I have the access point configured in client mode for my printer to connect wirelessly to our network. This works. My question is how do I access the web based interface of the access point while it i
Client Mode
0Helpful
293Views
Sorry for putting the wrong model in the post, but I still don't see the TL-WA3001 as an option. I've tagged it instead. I've noticed an issue with my TL-WA3001 access point (using both the existing s
Multi-SSID ModeTL-WA3001
0Helpful
312Views