TL-WA3001 :: No option to change default device name in UI
>> This is for TL-WA3001 - There is still no option to select this device in the drop-down list <<
I have three TL-WA3001 and I would like to assign them a unique device name (vs. just IP address), but there is no option in the WebUI to make this change. Is there any other option?
TIA
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@bitmerlin I had the same problem, and just removed them from the network, then added them back in, which then gave me the option to change the default names... This, however, was on the BE10800, not sure if it works the same on your model...
- Copy Link
- Report Inappropriate Content
Thanks for the tip. When you say removed from the network, you meant factory reset ? Just trying to understand the process.
TIA
- Copy Link
- Report Inappropriate Content
This is what worked on my BE10800 - I literally removed the devices from the app. When you do this, it factory-resets the satellite unit, which causes it to ultimately enter "add" mode and start blinking blue. Then you can use the + sign on the main Deco app page to have it reconnect. At that time, it will ask you for the location of the unit, which then becomes the name. Remember to press "save" at the top before leaving the page where you renamed it.
- Copy Link
- Report Inappropriate Content
TL-WA3001 is a standalone AP and not managed via an app like Decco units. Configuration is via a web UI.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 254
Replies: 5
Voters 0
No one has voted for it yet.