Access Points
The Access Point products are mainly designed to establish a wireless network, and, with multiple working modes, you can also expand your existing wireless network or provide internet access to your wired only devices. In this section you can say hello to other members, ask, answer or discuss technical topics regarding Access Points.
Access Points
The topic was originally posted by Kevin_Z in TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode This Article Applies to: TL-WA3001 V1 Overview We hope to offer you a chance to experie
OfficialHighlighted Thread
3Helpful
631Views
I bought a TL-WA1201 to work as an AP. It's was set up fine and appeared to be working both in 2.4 and 5Ghz. But not i have many devices connecting to on 2.4 which now say connected by no Internet. If
By
Slothy811l
0Helpful
10Views
Model is actually TL-WA1801 but model drop down wouldn't let me enter that. It's set up for access point mode and is working well but when I look at status on app or online it never shows a client hoo
2Helpful
44Views
I connect a tp link router or tp link access points to a frontier modem with ip of 192.168.254.254 the ap shows online but devices can't connect to the WiFi . Also tried to connect a tp link router it
0Helpful
167Views
I currently have the following hardware a. Xfinity ARRIS TG4482A v10 cable modem and Wi-Fi router WIFI 2.4 & 5.0 enabled SSID: ABC123! (for both 2.4 and 5.0) location: Downstairs b. tp-Link EAP225 v3
0Helpful
43Views
Note that I had to enter TL-WA901N as the model in this post as the TL-WA3001 isn't listed. Feel free to update that field. I'm using a TL-WA3001 as the Wi-Fi access point for my LAN. The WA is in Acc
Access point mode
By
arrowd
0Helpful
43Views
Hello, I have a mesh network set up inside my house using an AX55 as a base and various models of mesh devices to route the signals through the house. I want to add better coverage to my property outs
3Helpful
101Views
>> This is for TL-WA3001 - There is still no option to select this device in the drop-down list << I have three TL-WA3001 and I would like to assign them a unique device name (vs. just IP address), bu
Multi-SSID ModeCustom Device Name
0Helpful
104Views
I am attempting to set up and configure my access point TL-WA801ND. I have ran an ethernet cable from my router/modem in my house to my workshop about 150 feet away (may be up to 200 feet of cable). I
0Helpful
131Views
used in range extender mode on my GUEST network it allows access to other devices PROBLEM: when I extend the ROUTER guest network using the TL-WA1201, then the TL-WA1201 guest network allows access to
Range Extender Mode
0Helpful
153Views