Migrating to OPNSense router, and limited ports. Current setup OC200 is connected to router, but no available port on the OPNSense box. Am I setting myself up for problems if the OC200 is connected to

This guide is for advanced users! How to enable split-switch routing per vlan, with seperate DHCP pools for end clients depending on use case General Overview Prerequisites: - Omada Router - At least

@Clive_A As we wrote here I have a question to the ER7412-M2 about the firmware updates.. just don't wanna full fill now the other ones inbox.. https://community.tp-link.com/en/business/forum/topic/78

Goodmorning, i hava an omada system with a tl-sg2210mp switch. However, I am falling short a dozen ports. Not really poe+ ports. How can I add another switch? Do I just plug this in to the router and

When there is an omada adopted Easy-Managed switch (eg, ES205G) anywhere on the network, you cannot edit an IP group used in any switch ACL without first disabling that ACL, and re-enabling it after e

Dear all. I have replaced an old D-Link DSG 1210-28 switch by an SG3428X a while ago and since then I was wondering about the blinking pattern of the SG3428X. While with the D-Link, the LEDs blinked s