@ghost124 Hi, In theory you should do it on device config page or whole SSID config. If you use EAP in standalone mode: Don't forget to APPLY (save) changes after that. In Controller management mode:...

@LTCTechnologies Hi, I'm not sure if I understood you correctly... So you want to open port (for example 8080) but only for specific external IP (for example 192.168.1.165). So why don't you use...

@Cdn_Brad As in previous post. Use DynDNS service. If you need free one then there is freedns afraid org or duckdns org. You can also use paid one or your own domain if you own any. Set up DynDNS...

@infosecX Hi, Are your devices manages by controller? Or standalone? If controller, do you have LLDP enabled? Cheers

@Mellx1 Hi, Have you checked official instruction for that? I believe point 3.2 is what you are looking for: https://www.tp-link.com/us/support/faq/3654/ Cheers.

@Bugs123 Hi, You can as far as I know. I won't help with that since I have no experience with this. Sorry. Keep in mind that this solution has one disadvantage, once the ISP is down, the policy will...