Home Network Community > Wi-Fi Routers > MAC Address - Wired
< Wi-Fi Routers

MAC Address - Wired

MAC Address - Wired

MAC Address - Wired
MAC Address - Wired
3 weeks ago - last edited 2 weeks ago
Tags: #Address Reservation
Model: Archer C80  
Hardware Version:
Firmware Version:

My router's ip address is 192.168.2.1. My desktop computer has WiFi turned off with its wired (only one 1 network adapter connected directly to the router) MAC Address reserved as 192.168.2.11 (in the router's admin DHCP Address Reservation List) to the the wired MAC Address. However, it never allocates t92.168.2.11 but allocates a new Permanent 192.168.2.10x (i.e. from the Pool of ip addresses, which aren't reserved) when I disconnect wired & reconnect it. Why is this happening and how can I make the router 'behave'?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:MAC Address - Wired -Solution
3 weeks ago - last edited 2 weeks ago

  @JohnRose 

 

Try to delete that via Advanced=>Security=>IP & MAC Binding=>ARP List:

 

 

or if that doesn't work just reboot teh router.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
4 Reply
Re:MAC Address - Wired
3 weeks ago - last edited 2 weeks ago

  @JohnRose 

 

Using DHCP address reservation makes sense when the reserved IP address is in the router DHCP address pool.

Outside the router DHCP pool you could set your static IP addresses.

So try to reserve an IP address in the router DHCP pool and check if that works as expected.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:MAC Address - Wired
3 weeks ago

  @terziyski 

I changed DHCP Pool to include the rtequired static (i.e. reserved address) of 192.168.2.11, disconnected wired & reconnected wired. On the attached screenshot, it says that 192.168.2.11 has 2 permanent ip addresses. How do delete the 192.168.2.109 one?

File:
Screenshot from 2024-10-24 14-43-34.pngDownload
  0  
  0  
#3
Options
Re:MAC Address - Wired -Solution
3 weeks ago - last edited 2 weeks ago

  @JohnRose 

 

Try to delete that via Advanced=>Security=>IP & MAC Binding=>ARP List:

 

 

or if that doesn't work just reboot teh router.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
Re:MAC Address - Wired
2 weeks ago
Thanks, terziyski. Useful to know about about ARP List. I've now done that for my DHCP Reserved Addresses. I've found out the cause of the problem. The wired MAC Address of my desktop was set to Random rather than Permanent. All now Ok: confirmed by actual hardware address displayed by "ethtool -P eno1" displaying in ARP List, DHCP Reserved Addresses and DHCP Client List.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 145

Replies: 4

Tags

Address Reservation
Related Articles
Change MAC address
591 2
How to change MAC Address?
158 0
Archer A8 MAC - IP binding
434 0
MAC address used for WDS
1607 0
 Mac address
290 0
 Mac address
1157 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.