Beta Software [Closed] Public Beta for Archer AX55 V1 Supports EasyMesh Ethernet Backhaul, DoH&DoT, ECO Mode etc.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Update on Deco 11, 2024:
All the new features and modifications has been implemented in the latest official firmware: Archer AX55(EU)_V1_1.3.3 Build 20240628 or Archer AX55(US)_V1_1.3.2 Build 20240325. We recommend updating your router firmware to the latest version.
This thread will be closed for further commends. If you encounter any new problems, please Start a New Thread to provide feedback.
Jan. 31st 2024 Update:
The trial period for the beta firmware has ended, and we will continue to address the ongoing issues.
Please keep an eye out for the official firmware release. If you encounter any new problems, please Start a New Thread to provide feedback.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Hello Everyone,
We're thrilled to announce the release of public beta firmware for Archer AX55 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, DoH&DoT, ECO Mode, etc. We encourage you to try out this beta firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
Download Link:
Archer_AX55_V1_1.2.6 Build_20231130
Notes:
1. This is a beta firmware and different from the official 1.2.6 version official firmware, please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
2. This public beta firmware for Archer AX55 V1 can be applied to all versions (EU/US/JP/TW/etc.).
Modifications of 1.2.6 Build 20231130 compared to previous beta firmware
1. Improved client type identification accuracy
2. Added quick setup for third-party VPN including Surfshark and NordVPN in VPN Client feature
Here are the related FAQ:
How to Install Surfshark VPN on TP-Link Wireless Routers
How to Install NordVPN on TP-Link Wireless Routers
3. Added new HomeShield parental control features including Blocked Apps, App Time Limits, Always Allowed Apps etc.
The above two modifications are the same as this thread: Public Beta Release for Archer AX55 V1 to Enhance Its Ability to Recognize Client Devices
4. Added new functions to Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
5. Added EasyMesh Backhaul Steering and AP Bind (Preferred WiFi Uplink AP)
Enabling Backhual Steering allows the satellite devices to flexibly connect to different mesh nodes based on their load status, optimizing your EasyMesh network performance.
Preferred WiFi Uplink AP: by default, it is set to Auto, when there are more than two mesh nodes in the same EasyMesh network and wireless backhaul is used, you could select a preferred AP for the satellite device, the preferred AP can be either the main router or another satellite device.
Improvements and Modifications of previous beta firmware 1.2.6 Build 20231106
New Features and Optimizations of EasyMesh:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
More New Features
5. Added DoT and DoH features on Advanced->Network->Internet page, which supports customizing DNS Server as well.
6. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
10. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
We invite you to download and install the beta firmware to explore these incredible new features. If you encounter any issues or have any suggestions, please leave your comments. Your input is invaluable to us.
Thank you for your continued support and for being part of our community.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
What is DoH and How to use it on TP-Link Wi-Fi Routers?
Product List of Wi-Fi Routers that Support DoH
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you very much for the feedback. I've forwarded all the feedbacks to our senior engineer.
By the way, for rebooting satellite AX55, you could also use the new Tether App and reboot the satellite AX55 on the Tether App: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Report Inappropriate Content
Hi Sunshine,
I connected both AX55s via Ethernet cable and the ethernet backhaul worked (stable) for some hours. But now, a couple hours later the Wifi network has become very instable again. Devices keep disconnecting all the time, somethime not able to connect at all.
- Copy Link
- Report Inappropriate Content
May I have the detailed topology of your whole network now? please also try connecting the WiFi next to the main router and also the second router to identify if both of them are not working.
If possible, please connect to main AX55 router and check the EasyMesh network status, share with us the screenshots and also LED status on both AX55.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine is there a way to to enable Guest Network in AP when EasyMesh is enabled? I can't find that option in my AP, and my main Router is not sharing it with the AP
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Macrox wrote
@Sunshine is there a way to to enable Guest Network in AP when EasyMesh is enabled? I can't find that option in my AP, and my main Router is not sharing it with the AP
Hi, is your AX55 AP mode working as the EasyMesh main unit or satellite unit? Guest Network should be available on the main unit at least.
- Copy Link
- Report Inappropriate Content
Sunshine wrote
Macrox wrote
@Sunshine is there a way to to enable Guest Network in AP when EasyMesh is enabled? I can't find that option in my AP, and my main Router is not sharing it with the AP
Hi, is your AX55 AP mode working as the EasyMesh main unit or satellite unit? Guest Network should be available on the main unit at least.
@Sunshine my AP is working as a satellite. Guest network is available on the main router, but I need it to work in my AP (because is in another floor) and I can't find a way
- Copy Link
- Report Inappropriate Content
Hi, satellite router doesnt have guest network at this moment, we have reported it to the development team to evaluate it, please wait for any new firmware update.
- Copy Link
- Report Inappropriate Content
Today, to my surprise, your global website made available the new firmware release. After downloading it and updating my routers, everything is working well. I have not yet tested the ethernet backhaul capability, but will do so in the near future. Your team has done a great job! Thanks...
Update 31-12-23:
I just realized the new official release of the 1.2.6 firmware is not the same as the 1.2.6 beta release. I am testing the beta firmware now and will let you know if there are any problems. One suggestion for now is that there should be a way to assign a static IP to an EasyMesh satellite AX55. Unless I missed something during the setup, I can not assign a static IP to the router and have to use a reserved DHCP address from the main router.
I also have some questions since the web interface of the satellite router only has a few options. Does the satellite router "copy" the settings of the main router for such things as device isolation? What is the satellite router's DHCP setting. i.e. "auto" or "off"? What is the correct procedure for setting up the satellite router as an access point with EasyMesh enabled?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 67038
Replies: 300
Voters 6
