DSL Modem Routers
TroubleshootingVoIP will not connect on TP-Link modem router? Check this.
Some customers may encounter an issue when setting up the VoIP service on the TP-Link VoIP modem routers. Refer to this article to troubleshoot first on your own before reaching out to a tech support
VoIPInstallationHighlighted ThreadOfficial
8Helpful
15376Views
Solution'Authentication failed, Server TLS version is too low' appears when connecting OpenVPN of DSL Modem
This Article Applies to: Archer VR2100 V1, VR2100v V1, VR600 V3, VR400 V3, VR2800 V1 Issue Description: After updating the OpenVPN client version, some users might be unable to connect to the OpenVPN
VPNOfficial
40Helpful
16655Views
This Article Applies to: Archer VX1800v V1 Phenomenon Description: When connecting the Archer VX1800v to Sky Broadband (UK) or NowTV MER line and configuring it through the web interface, the "Sky(MER
Network ConnectivityOfficial
14Helpful
1535Views
TroubleshootingNo internet service after quick setup
Hi All, Occasional there is some feedback that there is no internet service after quick set-up. Since most of our DSL modem routers, such as VR400/VR600/VR2100, etc. support multiple working modes, we
Highlighted ThreadNBN ConfigurationOfficial
6Helpful
11070Views
hi i have same problem with modem archer vr400 v3. https://community.tp-link.com/en/home/forum/topic/271574?page=1 it have 2 hidden wifi network (2.4 GHz and 5 GHz) When will the new version of the pr
Highlighted ThreadOneMeshOfficial
50Helpful
11326Views
Hello, I'm trying to set up a VPN on my Archer VX1800v, but it's stuck on the status "connecting" and never fully connects. This same VPN configuration works without issues on the OpenVPN app on my mo
VPN
0Helpful
312Views
Setup: Archer VX1800v + 2x RE605X Issue: I've tried calling from 3 different phones while connected on my WiFi but Whatsapp only says "Connecting". When on my Mobile Data call goes through it's only w
Network Connectivity
0Helpful
66Views
I tried to setup VPN client on my vr600 after update the firmware as this feature added by the latest firmware but it doesn't work and I contacted tp-link support and they confirm that there is a prob
VPNVPN client
By
Hany_Ghoneim
· Latest post Yesterday
by Hany_Ghoneim
0Helpful
39Views
Hello i have a problem with the ipv6 on LAN side after the firmware update. Ipv6 is not working anymore. Sometimes it works few seconds after is gone ( packet loss on ipv6 ping) on the wan side is the
By
Daniel3355
· Latest post Thursday
by Marvin_S
0Helpful
318Views
Hello, I've been using the Archer VR600 v3 for a while and it's been working great. However, recently I upgraded my internet package to a higher one; VDSL2 (profile 35b) which should give me speeds up
Network Connectivity
By
JoeyOggie
· Latest post Thursday
by Hany_Ghoneim
0Helpful
142Views