My current situation is: main LAN on a 192.168.1.0/24 subnet (plus a v6 subnet) Hypervisors LAN on 172.16.0.0/24 (plus another v6) i want to enable some devices (specified in the HyperAllowed IPGroup)

It would be nice to have PPPoE passthrough on the ER605, as some ISPs allow customers to buy multiple IPs but only allow allocation through multiple PPPoE sessions

It would be useful to have an "Enable/Disable" option for each Access Control Rule in the Firewall, just like it can be done in the Transmission->NAT tab. This is especially useful when exposing IPv6

Hi, while i was playing around with the captive portal feature on the ER605, it has come to my attention that it only blocks IPv4 traffic, users can bypass the portal and gain access to the internet b

I saw this suggested in another thread but that thread was locked so I'd like to propose this here. Having multiple IP addresses is one of the touted features of IPv6, but also of note is that due to

hi, it would be nice to have a DHCPv6 "status page", allowing a sysadmin to look at active DHCPv6 leases and assign static addresses to the various devices, like the one that is currently available fo