This guide will show you how to enable inter-vlan routing through your L2+ or L3 switch, keeping full DHCP reservations working without the need for a seperate DHCP server, and without the need for st

Hello, Hardware is ER8411, controller is Omada Software Controller Windows v5.14.26.1 There are two issues with IDS/IPS: 1. Site Settings - Network Security - IDS/IPS - IDS/IPS Settings tab - Security

I have a VLAN named "admin" that has no speed restrictions. My current internet speed is 300 Mbps. However, in the wireless network named "admin" with the same VLAN, the speed is restricted to 5 Mbps.

Hello, When configuring the router via the controller, it is impossible to disable the SFP+ WAN. As a result, I keep getting the error ‘SFP+ WAN/LAN2: DHCP client setting IP failed’. Is there any othe

Looking at the datasheet, the ER7206 v2 is listed as a nat throughput of a full 1gbit wan connection. Is that PER WAN connection, so if you have 2x 1gbit WAN links, and with policy routing, it can ach

When setting rate limits for an SSID in controller, on 5ghz the limit per client seems to be hard limited to around 220mbit down despite the rate limit profile being set to 800mbit or any value higher