@Ahmad_Ibrahim You can have the speed mentioned only connected wireessly within you LAN - between your wireless devices only. Since C20 WAN/LAN ports are only 100 mbps if you connect a device by...

@heyigun Set VR2800 a LAN IP address within your network subnet. Disable its DHCP server and start using its LAN ports to connect devices.

@Sixkiller According to this article AX55 Pro doesn't support easymesh in AP mode. But you could do the oposite - connect the AX55 Pro as a satellite device to Deco X55 - details.

@lionel13 Here's a port-forwarding tester - https://www.yougetsignal.com/tools/open-ports/ Make sure that your router WAN port IP address is public. If you have a private IP address on the WAN port...

@lionel13 Yes, it is. But you want to configure a port-forward to this IP address. So use this IP address: when configuring the port-forward. If you want to open port 80 for a local device, please...

@lionel13 If you've set a DHCP address reservation (instead of static IP address - it's still from your LAN) then point to that IP address.