@mak50 If you've checked the Only Allow the Following IP and entered your WAN IP adddress: You should reset the modem and reconfigure from scratch, If you've made any configuration backup prior to...

@Tom-B Try this guide. If you can't find Backup and Restore section then this has not been implemented in the router FW.

@billyrg8 AXE5400 supports both Dynamic IP and PPPoE type of connections. Internet VLAN can be set here: In Mode filed you should select your ISP or if it's not present, use Custom and set your...

@c80-pool Your TP-Link ID and password are the credentials that you use to login this community. TP-Link ID password is can be different than your roouter local admin password. The setup process is...

@billyrg8 Depending on your ONT make an model, it coud be in router mode or bridge mode - which means the wireless router behind it could use Dynamic IP or PPPoE connection. Best option is to contact...

@Veuxly You should do a configuration similar to this one to open ports on your router so the Xbox is working properly. A quicker way to do this is to configure a DMZ for the Xbox IP address -...