@nojak Finally got it working. I re-did the steps, but this time I started with vlan50 and then added vlan60, then moved the ap to trunk port and then changed management vlan to 50. So it is all good...

@photo Update: I tried the whole process again but started with access port in vlan50 and then added vlan60 and moved the ap to trunk port and then changed managment vlan to 50, and finally success....

@nojak I did try it but still couldn't reach the web gui. I am gonna try it again, may be with a reboot to ensure changes to Management vlan gets applied in AP

@nojak Hi actually I did the setup in the same way you described. Actually I created a post on that with explanations on how I did it https://community.tp-link.com/en/business/forum/topic/210426 But...

@nojak Great feed back. I bought EAP245 last week and still fighting to make web gui accessible when AP is connected to trunk port in my managed switch. Would you have any suggestions?

I am using Pfsense router + hp procurve 1810 switch with vlans. During initial setup I connected EAP245 AP to vlan60 and assigned 10.0.6.xx as static ip for AP. Then added two SSIDs with vlan50 and...