@photo sounds like you do not have the management vlan properly configured on the AP as it works untagged. Management -> Mangement Access and make the Management VLAN be 60.

@samc2696 APs like the EAP225 (and EAP245) are normally ceiling mounted, so the antenna pattern is basically a hemisphere down from the ceiling (or up from the unit if it is on the floor or on a...

@photo I'd first try a non-trunked port. Make sure you can access it that way. Then setup VLANs on the EAP and move to a trunk port. Also look at this thread:...

I just installed 5 APs and the Omada software controller on a Raspberry Pi (rpi). This was actually a residential install. I chose tp-link EAPs on price and features/performance. 1. EAP225v3 and...

@tplink Please add DFS channel support for US units, like you did for EU. Leave it up to users to decide if they want to turn them on or not, depending upon their environment, with suitable logging...

@TechAdventurer The controller does run under Linux. I'm running it on a Raspberry Pi 2 for 5 APs (which is also running some other lightweight services). Lots of tutorials online for how to do this.