@MattPorter I haven't turned any IoT devices off when testing although most are off already and the rest, as you say, should be passive. Amazon has the XE200's in pairs for $599 CAD + 13% tax and...

@MattPorter I went digging... XE75 Broadcom 1.7GHz Quad-Core CPU coupled with 512MB RAM XE200 2.2 GHz Quad-core CPU. 2× 512MB DDR4 (1G in Total) I didn’t draw the connection to the XE75 & XE200...

@jzchen, no, IoT devices don't consuming anywhere close to that kind of bandwidth. Even if they were all running symultaneously (that would mean an action being performed such as bulbs or switches...

@MattPorter I'm outside the return window so I'm stuck with them ☹ They were OK until I tried the IoT network <ugh> I suspect there’s very little (no?) difference in the firmware running the XE75 &...

The IoT network was so unstable that I've had to disable it. I could see on my phone that it would connect but not get Internet access and then drop. I've enabled Guest, limited it to 2.4Ghz and I'm...

The firmware has been updated, three wired X75 v2 1.24 and two WiFi v1 are on 1.28 The device that was unstable was the main device, a wired v2 and is now stable after a complete reset and recreation...