Hi! I have the TL-ER6020 configured with 2 WAN ports. While WAN Port 1 is my primary one using a VDSL connection, WAN port 2 is meant to be used as failover with a LTE-Modem. Load Balancing is...

@Fae Hi Fae, thanks for the reply! Sadly, this led to other problems and some devices and being reachable in the LAN anymore. Since the TL-ER6020 doesn't seem to work with internal DNS-Server...

Hello everyone! I have migrated from a Fritzbox to the TL-ER6020, mostly because of WAN-loadbalancing and failover. So far the setup of the router has been pretty smooth, I've just got one problem...

Hello everyone! Since the support for a redundant controller setup, which was still possible with the Auranet hardware controller, has been dropped for the Omada hardware controller, I would like to...

@forrest Sorry for the horribly late reply! :-( New devices can indeed not connect to the APs/Wifi at all when the SSID is hidden - if SSID is set be broadcasted, connecting to it works just fine and...

forrest, thanks for the reply! For the first issue, do you mean that after you upgrade the firmware for the EAP, your Omada Controller can still manage the EAP devices, but you cannot see the EAP...