Happy to provide the diagram ... +----------+ +----------+ +----------+ | router |---------------------| 1016DE|--------------------| 1016DE| +----------+ +----------+ +----------+ | | | | | |...

They are interconnected by a single CAT5e cable. They are running the latest firmware. I even Factory Reset them after the firmware upgrade. They have been IP'ed to 10.x.x.2 and 10.x.x.3. I've tried...

@TriuneTechAZ I was able to resolve the problem. I had mistakenly set VLAN 1 to Tag in the OC200. Once I removed the VLAN setting from the associated SSID, violla!

I have 2 TL-SG1016DE v3 Easy Smart switches. I want to use 1 to feed the first floor and 1 to feed the second floor. But when I connect these 2 switches together they create some type of broadcast...

It is a very strange issue. The DHCP server is the main firewall, Netgear SRX5308. No captive portals are activated. The Guest Network is NOT selected on the "Guest" network. Have not done a packet...

I have a system in place with 6 total AP's all of which are EAP245's. Two are v3 hardware, four are v1 hardware. They are all controlled by an OC200 Omada controller. There are 2 basic SSID's carried...