I just let it idle for 2-3 days, and it started working automatically. Not sure what went wrong int he first run.

After much struggle (https://community.tp-link.com/en/home/forum/topic/671468?replyId=1370914), I have added VIGI Cameras to the NVR via the physical UI and TP-Link protocol. There are 4 cameras: One...

I was able to add Vigi cameras from another subnet without an issue. I just had to choose TP-Link as the protocol, and it didn't complain, though I had to deal with the NVR UI. Unfortunately, the...

OzzyBill wrote Hi @aashishvanand , I had a very similar problem just over the weekend. My solution was to use only the NVR Web Interface, I used the "cameras/add manually" option and specified the IP...

I'm experiencing an issue with my TP-Link NVR1008H UN 2.0 (8 channels). My NVR is on the 10.0.0.0/24 subnet, while some Vigi cameras are on the 10.0.1.0/24 subnet. I've been trying to add these...

Hi @Hank21, I ran your simple test, and after reboot, the camera feed doesn't come back online automatically. Once the connection is lost unless I reboot the NVR it doesn't work. I have the following...