On the WAN screen you have: IP address 192.168.2.11 Default Gateway 192.168.2.1 Default DNS 192.168.2.1 Subnet Mask 255.255.255.0 This means that all devices on your network will have IP addresses in...

If you take a look at this article on the TP-Link site, it says: "If you want to use Deco along with your existing router, do the following: Define a different network name (SSID) and password from...

Regardless of what equipment you decide to use in your home, you will then connect to the internet through your ISP and other organisations who could be using equipment that sends data back to the...

I am interested in this too. I can see that where a device is wired or does not move around, and while all Deco nodes are operating correctly, having Mesh turned on does not achieve anything. The...

It has been 6 months since the last proper firmware update. Actually there was an update 3 months ago, but it caused problems and was withdrawn after a few days. That has happened before, so don't...

I had a "Deco Update Available" message in the app earlier in the week, but when I go to update it still says I'm "currently up-to-date" on 1.2.8 Does that mean the new firmware update has been...