The picutre of this FAQ is the old version product. Do you mean you cannot choose the LAN interface in multi-nets NAT setting? If yes, you may be using the new version TP-Link router. Just choose the...

@AshleyNL Just tell a simple test for inter-VLAN routing. I hope it can help you find the problem. T2600G-28TS # vlan 10 # vlan 30 # # interface vlan 10 ip address 192.168.10.1 255.255.255.0 no ipv6...

IPsec VPN is not based on routing. So it will not work even if add static routing. PPTP/L2TP is based on routing. Maybe you can try. As I know, the WAN of the router can be chosen as L2TP/PPTP as...

I can get the meaning the you added routing and multinet-NAT on Side A. But still need to make the traffic of Side B be able to forward to Side A. For IPsec VPN, we need to fill remote subnet in...

If you create a new 802.1Q VLAN like VLAN 10, then put your mirror port to VLAN 10 and change PVID to 10. Check if can isolate the mirror port.

I think the switch cannot do that. Generally the switch cannot turn off LED because LED is important for showing the switch working status.