saiga6360 wrote The only way I can configure the router as an access point is to do LAN to LAN and disable DHCP on the access point. Make sure its IP address is on the same subnet as your main...

p.s. I've even enabled a Static Route on a PC on the "Master" network as follows "route add 192.168.1.0 MASK 255.255.255.0 192.168.0.150 METRIC 2" but the TP Router clearly doesn't route traffic from...

Model : Hardware Version : Firmware Version : ISP : I have a C59 which I've setup in the far corners of the house to offer Wifi/Wired connections over there My 'Master' Router is connected to it's...

Model : Hardware Version : Firmware Version : ISP : I have a C59 which I've setup in the far corners of the house to offer Wifi/Wired connections there - my 'Master' Router is connected to it's WAN...