hi @Clive_A , NVR has only two ports: LAN and WAN. In this photo you can see access point (connected to router via LAN in the WAN port) and NVR connected to AP via LAN port)

hi @Clive_A , i have disconnected pc from wifi and connect directly pc via lan to lan port of nvr.

hi @Clive_A , i set to surveillance mode, reboot the nvr e set correct gateway on my net: but internet connection is not work

Hi @Clive_A , thank you for your reply. I do not want use NVR as router. My NVR is just set to integration mode as you can see below DHCP server is disable where i set wrong? thank you in advance

GOOD MORNING ALL, I purchased an NVR model VIGI NVR1108H-W(EU) 1.0. This product in not in Model list above. I installed it in my network via LAN cable and it recognized my Tapo C510W and C500...

@Solla-topee Hi, First step i would try to reduce layover time at 1 minute or 30 seconds. Thank you