Last update and thanks again! Above is mail from Reolink support. i still don't fully understand why it's not better to plug the cameras directly into the NVR (which is also PoE) since the NVR is...

UPDATE! I installed the PoE switch I borrowed from my coworker. Made sure my X50 mesh was working (non-wired). Wired the two X50 to PoE switch and this worked. Then I wired the Reolink NVR to the...

@David-TP I found the Reolink FAQ you refer to: 3 methods (NVR vs. PoE switch) / Reolink I have asked Reolink about method #3 while adding X50 Deco. They try to be helpful but it is clear that they...

Thanks a lot! I checked it out at Reolinks homepage and this must be the issue - see screenshot. Unfortunate that Reolink support didn't ask me to be aware of this when I specifically asked them if I...

I have added a drawing of the intented setup. I ended up chosing this setup because Reolink support told me that the NVR would double as a switch. This meant that I wouldn't have to place a switch...

@MrMogensenDK If I do the extra work of cable connecting the main DecoX50 to the attic switch where X50 Outdoor are also connected to I will save some money on not having to buy several PoE injectors...